A Model accounting for Stiffness Weakening of Curvic Couplings under Various Loading Conditions
Open Access
- 11 February 2020
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-17
Abstract
Curvic couplings are frequently used in aeroengine rotors. The stiffness of the curvic couplings is of guiding significance to the engineering design of aeroengine rotors as it is significantly different from that of continuous structures. In this paper, definitions and relations of the structure parameters for a curvic coupling are firstly introduced. Based on this proposed mechanical framework, a novel mechanical model accounting for the stiffness weakening under shearing, compression, bending, and torsion is developed for curvic couplings. In this model, a three-spring system, which consists of two types of springs, is adopted to describe the equivalent stiffness of a pair of meshing teeth of curvic couplings. The spring stiffness is obtained by employing the plane strain analysis of a discretized tooth with trapezoid pieces. Subsequently, the stiffness matrix of curvic couplings is deduced based on the deformation compatibility of each tooth and the force balance of the whole structure. A series of analyses of curvic couplings with various structure types are performed to demonstrate the mechanism behind the proposed model, and the results are verified against those obtained from finite element analyses. It is shown in this study that the pressure angle is the major factor affecting the stiffness of curvic couplings, while the compression stiffness and bending stiffness are more sensitive than other stiffnesses. Furthermore, the stiffness of curvic couplings is considerably smaller compared to that of continuous structures, indicating the importance of appropriate modelling of stiffness weakening in the design of aeroengine rotors.Keywords
Funding Information
- Ministry of Industry and Information Technology of the People's Republic of China (JSZL2016204B102, 51575022, 11432003, 11602050, 11702053, B14013)
- National Natural Science Foundation of China (JSZL2016204B102, 51575022, 11432003, 11602050, 11702053, B14013)
- National Natural Science Foundation of China (JSZL2016204B102, 51575022, 11432003, 11602050, 11702053, B14013)
- National Natural Science Foundation of China (JSZL2016204B102, 51575022, 11432003, 11602050, 11702053, B14013)
- National Natural Science Foundation of China (JSZL2016204B102, 51575022, 11432003, 11602050, 11702053, B14013)
- 111 project of China (JSZL2016204B102, 51575022, 11432003, 11602050, 11702053, B14013)
This publication has 23 references indexed in Scilit:
- Optimization of dynamics of non-continuous rotor based on model of rotor stiffnessMechanical Systems and Signal Processing, 2019
- Stiffness Calculation Model of Thread Connection Considering Friction FactorsMathematical Problems in Engineering, 2019
- Stiffness Calculation Method and Stiffness Characteristic Analysis of Bolted ConnectorsMathematical Problems in Engineering, 2019
- An effective numerical method for calculating nonlinear dynamics of structures with dry friction: application to predict the vibration response of blades with underplatform dampersNonlinear Dynamics, 2016
- Efficient Optimization of Cylindrical Stiffened Shells with Reinforced Cutouts by Curvilinear StiffenersAIAA Journal, 2016
- Analytical model of bolted disk–drum joints and its application to dynamic analysis of jointed rotorProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013
- A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange jointsJournal of Sound and Vibration, 2012
- Finite element analysis and modeling of structure with bolted jointsApplied Mathematical Modelling, 2007
- Simulation of dynamics of beam structures with bolted joints using adjusted Iwan beam elementsJournal of Sound and Vibration, 2004
- Exact stiffness matrix for a beam element with axial force and shear deformationFinite Elements in Analysis and Design, 1996