Properties of carbon nanofibers prepared from electrospun polyimide
Authors:
- 22 April 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 97 (1) , 165-170
Abstract
A solution of a polyimide (PI, Matrimid® 5218) in dimethylacetamide was electrospun, and carbonization of the electrospun nonwoven fabrics produced carbon nanofiber fabrics. The effects of iron(III) acetylacetonate (AAI) on carbonization and the resulting morphology were also investigated. The carbonization behavior of the nonwoven fabrics was examined by X‐ray diffraction and Raman spectroscopy. AAI promoted carbonization of the nonwoven fabrics and increased the carbon yield. Addition of 3 wt % AAI increased the crystal dimension of electrospun PI nanofibers from 1.06 to 4.18 nm and decreased the integrated intensity ratio from 3.37 to 1.83 when heat treated at 1200°C. Scanning electron microscopy images of the carbonized nonwoven fabrics showed that AAI remained as particles within the fibers after carbonization. In addition, transmission electron microscopy observations revealed that turbostratic‐oriented graphite layers were observed around the particles even at 1200°C, which have been reported only on carbonization of rigid‐chain solvent insoluble PI materials under tension. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97:165–170, 2005Keywords
This publication has 17 references indexed in Scilit:
- Preparation of carbon fiber web from electrostatic spinning of PMDA-ODA poly(amic acid) solutionCarbon, 2003
- Catalytic filamentous carbonCarbon, 2003
- Carbonization and graphitization of Kapton-type polyimide film having boron-bearing functional groupsCarbon, 2001
- Transport properties of porous membranes based on electrospun nanofibersColloids and Surfaces A: Physicochemical and Engineering Aspects, 2001
- Growth of iron clusters and change of magnetic property with carbonization of aromatic polyimide film containing iron complexCarbon, 2001
- Incorporation of iron particles into carbon films derived from polyimideSolid State Ionics, 1999
- Graphitization behavior of Kapton-derived carbon film related to structure, microtexture and transport propertiesCarbon, 1997
- The mechanism of polyimide pyrolysis in the early stageCarbon, 1996
- Structural and textural changes from polyimide Kapton to graphite: Part I. Optical microscopy and transmission electron microscopyJournal of Materials Research, 1992
- Microtexture and magnetoresistance of glass-like carbonsCarbon, 1991