Design, Modeling, and Analysis of a 3-D Spiral Inductor With Magnetic Thin-Films for PwrSoC/PwrSiP DC-DC Converters
Open Access
- 19 August 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 92105-92127
Abstract
A solution architecture for monolithic system-on-chip (SoC) power conversion is in high demand to enable modern electronics with a reduced footprint and increased functionality. A promising solution is to reduce the microinductor size by using novel magnetically-enhanced 3-D design topologies. This work presents the design, modeling, and analysis of a 3-D spiral inductor with magnetic thin-films for power supply applications in the frequency range of 3–30 MHz. A closed-form analytical expression is derived for the inductance, including both the air- and magnetic-core contributions. To validate the air-core inductance model, we implement a 3-D spiral inductor on PCB. The theoretical calculation of air-core inductance is in good agreement with experimental data. To validate the inductance model of the magnetic-core, a 3-D spiral inductor is modeled with Ansys Maxwell electromagnetic field simulation software. A winding AC resistance model is additionally presented. We perform a design space exploration (DSE) to investigate the significance of the 3-D spiral inductor structure. Two important performance parameters are discussed: dc quality factor $(Q_{dc})$ and ac quality factor $(Q_{ac})$ . Also, a 3-D spiral inductor structure with magnetic thin-films is characterized in Ansys Maxwell to estimate its potential, and a novel fabrication method is proposed to implement this inductor. The measured relative permeability ( $\mu _{r}$ ) and the magnetic loss tangent ( $tan~\delta $ ) of Co-Zr-Ta-B magnetic thin-films, developed in-house, are used to simulate the proposed structure. The promising results of the DSE can be easily extended to improve the performance of other 3-D inductor topologies, such as the solenoid and the toroid. The numerical simulations reveal that the 3-D spiral inductor with magnetic thin-films has the potential to demonstrate a figure-of-merit (FOM) that is significantly higher than traditional inductors.Keywords
Funding Information
- Tyndall National Institute, University College Cork and Science Foundation Ireland (15/IA/3180)
- “Advanced Integrated Power Magnetics Technology—From Atoms to Systems”
This publication has 54 references indexed in Scilit:
- Modeling and Crosstalk Evaluation of 3-D TSV-Based Inductor With Ground TSV ShieldingIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2016
- MEMS based fabrication of high-frequency integrated inductors on Ni–Cu–Zn ferrite substratesJournal of Magnetism and Magnetic Materials, 2016
- Palladium Activated Self-Assembled Monolayer for Magnetics on Silicon ApplicationsPhysics Procedia, 2015
- A Micromachined Wiring Board With Integrated Microinductor for Chip-Scale Power ConversionIEEE Transactions on Power Electronics, 2014
- A Novel Integrated Power Inductor With Vertical Laminated Core for Improved L/R RatiosIEEE Electron Device Letters, 2014
- On the Efficacy of Through-Silicon-Via InductorsIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2014
- Microfabrication of toroidal inductors integrated with nanolaminated ferromagnetic metallic coresJournal of Micromechanics and Microengineering, 2013
- Improved High Frequency Response and Quality Factor of On-Chip Ferromagnetic Thin Film Inductors by Laminating and Patterning Co-Zr-Ta-B FilmsIEEE Transactions on Magnetics, 2013
- Integrated on-chip inductors using magnetic material (invited)Journal of Applied Physics, 2008
- Magnetics on Silicon: An Enabling Technology for Power Supply on ChipIEEE Transactions on Power Electronics, 2005