Effect of filler loading and coconut oil coupling agent on properties of low‐density polyethylene and palm kernel shell eco‐composites
- 29 July 2014
- journal article
- research article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 22 (3) , 200-205
Abstract
Palm kernel shell (PKS), a waste from the oil palm industry, has been utilized as filler in low‐density polyethylene (LDPE) eco‐composites in the present work. The effect of PKS content and coconut oil coupling agent (COCA) on tensile properties, water absorption, and morphological and thermal properties of LDPE/PKS eco‐composites was investigated. The results show the increase of PKS content decreased the tensile strength and elongation at break, but increased the tensile modulus, crystallinity, and water absorption of eco‐composites. The presence of COCA as coupling agent improved the filler‐matrix adhesion yield to increase the tensile strength, tensile modulus, crystallinity, and reduced water absorption of eco‐composites. The better interfacial adhesion between PKS and LDPE with the addition of COCA was also evidenced by scanning electron microscopy studies. J. VINYL ADDIT. TECHNOL., 22:200–205, 2016. © 2014 Society of Plastics EngineersKeywords
This publication has 23 references indexed in Scilit:
- Utilization of cocoa pod husk as filler in polypropylene biocompositesJournal of Thermoplastic Composite Materials, 2013
- Modified Corn Cob Filled Chitosan Biocomposite FilmsPolymer-Plastics Technology and Engineering, 2013
- Polylactic acid/corn cob eco-compositesJournal of Thermoplastic Composite Materials, 2013
- Utilization of oil palm kernel shell as lightweight aggregate in concrete – A reviewConstruction and Building Materials, 2013
- Properties of coconut shell powder‐filled polylactic acid ecocomposites: Effect of maleic acidPolymer Engineering & Science, 2012
- Rheological and thermal properties of palm kernel shell–filled low-density polyethylene composites with acrylic acidJournal of Thermoplastic Composite Materials, 2012
- Surface modification of coconut shell powder filled polylactic acid biocompositesJournal of Thermoplastic Composite Materials, 2012
- Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic compositesComposites Part A: Applied Science and Manufacturing, 2010
- Preparation of an ionic‐liquid antistatic/photostabilization additive and its effects on polypropyleneJournal of Vinyl and Additive Technology, 2010
- Effects of alkaline and silane treatments on the water‐resistance properties of wood‐fiber‐reinforced recycled plastic compositesJournal of Vinyl and Additive Technology, 2008