The Synergy of Double Cross-linking Agents on the Properties of Styrene Butadiene Rubber Foams
Open Access
- 14 November 2016
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 36931
Abstract
Sulfur (S) cross-linking styrene butadiene rubber (SBR) foams show high shrinkage due to the cure reversion, leading to reduced yield and increased processing cost. In this paper, double cross-linking system by S and dicumyl peroxide (DCP) was used to decrease the shrinkage of SBR foams. Most importantly, the synergy of double cross-linking agents was reported for the first time to our knowledge. The cell size and its distribution of SBR foams were investigated by FESEM images, which show the effect of DCP content on the cell structure of the SBR foams. The relationships between shrinkage and crystalline of SBR foams were analyzed by the synergy of double cross-linking agents, which were demonstrated by FTIR, Raman spectra, XRD, DSC and TGA. When the DCP content was 0.6 phr, the SBR foams exhibit excellent physical and mechanical properties such as low density (0.223 g/cm3), reduced shrinkage (2.25%) and compression set (10.96%), as well as elevated elongation at break (1.78 × 103%) and tear strength (54.63 N/mm). The results show that these properties are related to the double cross-linking system of SBR foams. Moreover, the double cross-linking SBR foams present high electromagnetic interference (EMI) shielding properties compared with the S cross-linking SBR foams.Keywords
This publication has 56 references indexed in Scilit:
- Properties of chlorinated polyethylene rubber/ethylene vinyl acetate copolymer blend‐based foamPolymer Engineering & Science, 2011
- An experimental and theoretical investigation of the compressive properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite foamsPolymer, 2011
- Improvement of tensile properties and elastic recovery in ethylene vinyl acetate copolymer/multiwalled carbon nanotube nanocomposite foamsJournal of Applied Polymer Science, 2011
- Thermal and mechanical properties of microcellular thermoplastic SBS/PS/SBR blend: effect of crosslinkingPolymer, 2011
- Ethylene vinyl acetate copolymer (EVA)/multiwalled carbon nanotube (MWCNT) nanocomposite foamsJournal of Applied Polymer Science, 2009
- Preparation and Characterization of Graft Copolymer EVA-g-PUPolymer-Plastics Technology and Engineering, 2008
- Constitutive modeling for characterizing the compressive behavior of PMMA open‐cell foamsJournal of Polymer Science Part B: Polymer Physics, 2007
- Hyperbranched polycarbosiloxane with dendritic boron cores: Synthesis, characterization, and structure regulationJournal of Polymer Science Part A: Polymer Chemistry, 2006
- Influence of filler type and content on properties of styrene‐butadiene rubber (SBR) compound reinforced with carbon black or silicaPolymers for Advanced Technologies, 2004
- 13C solid-state nuclear magnetic resonance spectra of some air-cured alkyd polyester paintsPolymer, 1987