Boron‐Doped Polysilicon Passivating Contacts Achieving a Single‐Sided J0 of 4.0 fA/cm2 Through a Two‐Step Oxidation Process

Authors:

Abstract
Tunnel oxide passivating contacts with boron‐doped polysilicon (i.e., p‐type TOPCon) hold substantial potential for application in the devices with higher efficiency, that is, back‐junction (BJ) or all‐back‐contact (BC) solar cells. However, achieving excellent passivation for p‐type TOPCon remains a challenge. In this study, we propose a two‐step oxidation (TSO) method using low‐temperature oxidated silicon oxide (SiOx) with a post‐nitrous oxide/hydrogen plasma (N2O/H2) treatment to prepare high‐quality ultrathin SiOx and achieve highly passivated p‐type TOPCon. Through optimization of plasma treatment pressure and annealing conditions, we achieve excellent passivation and contact properties of double‐sided p‐type TOPCon, with an implied open‐circuit voltage (iVoc) of 740 mV, marking the highest publicly reported value for p‐type TOPCon. Additionally, we achieve a single‐sided saturation recombination current density (J0,s) of 4.0 fA/cm2 and a contact resistivity of 22 mΩ cm2. Semi‐finished back‐junction solar cell incorporating TSO‐SiOx exhibits excellent passivation performance with an iVoc of 744 mV, demonstrating the feasibility of device applications. The two‐step oxidation method proposed in this work enhances the passivation performance of p‐type TOPCon, offering a technique with significant potential for industrial applications in preparing high‐quality p‐type TOPCon.
Funding Information
  • National Natural Science Foundation of China (61974178, 61874177)

This publication has 39 references indexed in Scilit: