Dry-Spun Single-Filament Fibers Comprising Solely Cellulose Nanofibers from Bioresidue
Authors:
- 27 May 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (23) , 13022-13028
Abstract
We demonstrated that low-cost and environmentally friendly filaments of native cellulose can be prepared by dry spinning an aqueous suspension of cellulose nanofibers (CNF). The CNF were extracted from banana rachis, a bioresidue from banana cultivation. The relationship between spinning rate, CNF concentration, and the mechanical properties of the filaments were investigated and the results showed that the modulus of the filaments was increased from 7.8 to 12.6 GPa and the strength increased from 131 to 222 MPa when the lowest concentration and highest speed was used. This improvement is believed to be due to an increased orientation of the CNF in the filament. A minimum concentration of 6.5 wt % was required for continuous filament spinning using the current setup. However, this relatively high concentration is thought to limit the orientation of the CNF in the filament. The process used in this study has a good potential for upscaling providing a continuous filament production with well-controlled speed, but further work is required to increase the orientation and subsequently the mechanical properties.Keywords
Funding Information
- Konungariket Sveriges Regering
This publication has 25 references indexed in Scilit:
- All-cellulose nanocomposite fibers produced by melt spinning cellulose acetate butyrate and cellulose nanocrystalsCellulose, 2014
- Melt spun cellulose nanocomposite fibres: comparison of two dispersion techniquesPlastics, Rubber and Composites: Macromolecular Engineering, 2013
- Structure and Mechanical Properties of Wet-Spun Fibers Made from Natural Cellulose NanofibersBiomacromolecules, 2011
- Mechanical properties of wetlaid lyocell and hybrid fiber-reinforced composites with polypropyleneComposites Part A: Applied Science and Manufacturing, 2008
- Development of Flax Fibre based Textile Reinforcements for Composite ApplicationsApplied Composite Materials, 2006
- ‘Green’ composites Part 2: Characterization of flax yarn and glutaraldehyde/poly(vinyl alcohol) modified soy protein concentrate compositesJournal of Materials Science, 2005
- ‘Green’ composites using cross-linked soy flour and flax yarnsGreen Chemistry, 2005
- Natural fibres: can they replace glass in fibre reinforced plastics?Composites Science and Technology, 2003
- Composites reinforced with cellulose based fibresProgress in Polymer Science, 1999
- Future prospects for wood cellulose as reinforcement in organic polymer compositesPolymer Composites, 1989