Chitosan as a functional additive for high-performance lithium–sulfur batteries
- 17 June 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 3 (29) , 15235-15240
Abstract
Chitosan with abundant hydroxyl and amine groups as an additive for cathodes and separators has been proven to be an effective polysulfide trapping agent in lithium–sulfur batteries. Compared with common sulfur cathodes, the cathode with chitosan shows an enhanced initial discharge capacity from 950 to 1145 mA h g−1 at C/10. The reversible specific capacity after 100 cycles increases from 508 mA h g−1 to 680 mA h g−1 and 473 to 646 mA h g−1 at rates of C/2 and 1 C, respectively. In addition, batteries with separators that are coated with a carbon/chitosan layer can exhibit a high discharge capacity of 830 mA h g−1 at C/2 after 100 cycles and 675 mA h g−1 at 1 C after 200 cycles with the capacity fading to as low as 0.11% per cycle. This study demonstrates the benefits of using chitosan for not only lithium–sulfur batteries but also potentially other sulfur-based battery applications.Keywords
This publication has 28 references indexed in Scilit:
- Pitfalls in the characterization of sulfur/carbon nanocomposite materials for lithium–sulfur batteriesCarbon, 2014
- Mechanistic modeling of polysulfide shuttle and capacity loss in lithium–sulfur batteriesJournal of Power Sources, 2014
- Sulfur Nanocrystals Confined in Carbon Nanotube Network As a Binder-Free Electrode for High-Performance Lithium Sulfur BatteriesNano Letters, 2014
- Encapsulating MWNTs into Hollow Porous Carbon Nanotubes: A Tube‐in‐Tube Carbon Nanostructure for High‐Performance Lithium‐Sulfur BatteriesAdvanced Materials, 2014
- Polysulfide shuttle control: Towards a lithium-sulfur battery with superior capacity performance up to 1000 cycles by matching the sulfur/electrolyte loadingJournal of Power Sources, 2014
- Flexible freestanding sandwich-structured sulfur cathode with superior performance for lithium–sulfur batteriesJournal of Materials Chemistry A, 2014
- Porous carbon nanotubes etched by water steam for high-rate large-capacity lithium–sulfur batteriesJournal of Materials Chemistry A, 2014
- Revisit Carbon/Sulfur Composite for Li-S BatteriesJournal of the Electrochemical Society, 2013
- Polysulfide Shuttle Study in the Li/S Battery SystemJournal of the Electrochemical Society, 2004
- Rechargeable lithiumsulfur battery (extended abstract)Journal of Power Sources, 1989