Properties and Potential Application of Lead-Free (BaZr0.2Ti0.8O3) and Lead-Based (PbZr0.52Ti0.48O3) Flexible Thick Films
Open Access
Abstract
For the last several decades, energy harvesters based on piezoelectricity from mechanical vibration have emerged as very promising devices that are being explored extensively for their functionality in energy technologies. In this paper, a series of flexible lead-free BaZr0.2Ti0.8O3 (BZT)/PVDF and lead-based PbZr0.52Ti0.48O3 (PZT)/PVDF piezocomposites with variable filler content up to 50 vol% were prepared by a hot pressing method. The structure and morphology of the BZT and PZT powders, as well as the distribution of the piezo-active filler in the obtained flexible films were characterized by XRD and SEM analysis. In addition, the remnant polarization (Pr) and leakage current were also investigated to evaluate the breakdown strength in both types of flexible films. The calculations of storage energies and output voltage obtained for the investigated materials revealed an increasing trend with an increasing amount of BZT and PZT active phases. The maximum storage energy of 0.42 J/cm3 (and energy efficiency of 40.7 %) was obtained for the PZT–PVDF (40–60) films, while the maximum output voltage of about 10 V (~10 μA) was obtained for the PZT–PVDF (50–50) flexible film. In addition, a comparison between the properties of the lead-based and lead-free flexible films, as well as the potential use of these films as energy storage and energy harvesting systems were analyzed.Keywords
Funding Information
- Ministry of Science, Technological Development and Innovation Republic of Serbia (451-03-47/2023-01/200053, 451-03-47/2023-01/200134, 451-03-47/2023-01/200103)
This publication has 58 references indexed in Scilit:
- Effect of thermal processing conditions on the structure and dielectric properties of PVDF filmsJournal of Polymer Research, 2014
- Relaxor-based ferroelectric single crystals: Growth, domain engineering, characterization and applicationsProgress in Materials Science, 2014
- Electroactive phases of poly(vinylidene fluoride): Determination, processing and applicationsProgress in Polymer Science, 2014
- Structural and dielectric properties of polyvinyl alcohol/barium zirconium titanate polymer–ceramic compositeCurrent Applied Physics, 2013
- Effect of poling time and grid voltage on phase transition and piezoelectricity of poly(vinyledene fluoride) thin films using corona polingJournal of Physics D: Applied Physics, 2013
- A review on the dielectric materials for high energy-storage applicationJournal of Advanced Dielectrics, 2013
- Total pattern fitting for the combined size–strain–stress–texture determination in thin film diffractionNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2010
- Optimization of energy storage density in ceramic capacitorsJournal of Physics D: Applied Physics, 1996
- Dielectric studies of PZT-polymer compositesJournal of Materials Science, 1990
- β-phase formation of poly(vinylidene fluoride) from the melt induced by quenchingJournal of Materials Science Letters, 1987