Filtration Efficiency in the Recycling Process of Particle-Reinforced Aluminum Alloys Using Different Filter Materials

Authors:
Open Access
Publisher website
Google Scholar
Abstract
In this study, filtration of aluminum alloy (Al) with different weight fractions of SiC particles (SiCp) was investigated. Therefore, three different filter materials of 20 pores per inch (ppi) ceramic foam filters (CFF) were tested. A special three-chamber furan mold was used for the casting trials to provide uniform filling and flow conditions for the filtration process. Samples from sections of the gating system, as well as from the filter, were analyzed by optical light microscopy to determine the amount, size, and distribution of SiCp. A scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDS) was used for obtaining the element distribution in the composite. The filtration efficiency increased by decreasing the weight fraction from 20 to 5% of SiCp and reached a significant particle reduction of over 90%. Investigations of CFFs with a weight fraction of 10% have shown a clogging effect and metal flow interruption through the 20 ppi filter. An oxide layer was detected around the respective SiCp in the EDS. Moreover, a strong accumulation effect was observed, indicated by a steadily flattening curve of the density functions after each additional remelting cycle of the same composite material.
Funding Information
  • Deutsche Forschungsgemeinschaft (Project ID: 169148856 – SFB 920, Subproject T03)
  • Technische Universität Bergakademie Freiberg

This publication has 22 references indexed in Scilit: