98.1%-Efficiency Hysteretic-Current-Mode Noninverting Buck–Boost DC-DC Converter With Smooth Mode Transition
Authors:
- 12 May 2016
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32 (3) , 2008-2017
Abstract
A noninverting buck-boost dc-dc converter can work in buck, boost, or buck-boost mode. Hence, it provides a good solution when the input voltage may be higher or lower than the output voltage. However, a buck-boost converter requires four power transistors, rather than two. Therefore, its efficiency decreases, due to the conduction and switching losses of the two extra power transistors. Another issue of a buck-boost converter is how to smoothly switch its operational mode, when its input voltage approaches its output voltage. A hysteretic-current-mode noninverting buck-boost converter with high efficiency and smooth mode transition is proposed, and it was designed and fabricated using TSMC 0.35-μm CMOS 2P4 M 3.3 V/5V mixed-signal polycide process. The input voltage may range from 2.5 to 5 V, the output voltage is 3.3 V, and the maximal load current is 400 mA. According to the measured results, the maximal efficiency reaches 98.1%, and the efficiencies measured in the entire input voltage and loading ranges are all above 80%.Keywords
Funding Information
- National Science Council (NSC-102-2221-E-006-284-MY3, 104-2220-E-006-009)
- National Chip Implementation Center
This publication has 21 references indexed in Scilit:
- A Two-Mode Control Scheme With Input Voltage Feed-Forward for the Two-Switch Buck-Boost DC–DC ConverterIEEE Transactions on Power Electronics, 2014
- A hysteretic boost regulator with Emulated-Ramp Feedback (ERF) current-sensing technique for LED driving applications2013
- Design of an Average-Current-Mode Noninverting Buck–Boost DC–DC Converter With Reduced Switching and Conduction LossesIEEE Transactions on Power Electronics, 2012
- A low-voltage positive buck-boost converter using average-current-controlled techniques2012
- Modified Hysteretic Current Control (MHCC) for Improving Transient Response of Boost ConverterIEEE Transactions on Circuits and Systems I: Regular Papers, 2011
- Ripple-Based Control of Switching Regulators—An OverviewIEEE Transactions on Power Electronics, 2009
- Quadratic Differential and Integration Technique in $V^{2}$ Control Buck Converter With Small ESR CapacitorIEEE Transactions on Power Electronics, 2009
- A Compensation Technique for Smooth Transitions in a Noninverting Buck–Boost ConverterIEEE Transactions on Power Electronics, 2009
- Ultra Fast Fixed-Frequency Hysteretic Buck Converter With Maximum Charging Current Control and Adaptive Delay Compensation for DVS ApplicationsIEEE Journal of Solid-State Circuits, 2008
- A high-efficiency, dual-mode, dynamic, buck-boost power supply IC for portable applications2005