Abstract
A new process for patterning of YBa2Cu3Ox‐insulator multilayers is described, using a high‐temperature‐resistant CaO process mask, which can be evaporated directly onto previously patterned YBa2Cu3Ox layers and removed after film deposition. A crossover contact of two 3 μm wide and 30 μm long YBa2Cu3Ox striplines has been fabricated by laser deposition, using this patterning technique. The upper and the lower stripline of the crossover contact show Tc values of ≊89 K and a critical current density jc (77 K) of 2 and 4×106 A/cm2, respectively. The contact between the upper and the lower stripline is superconducting below 87 K. At 100 K, the normal conducting contact resistivity is 5×10−8 Ω cm2, based on a contact area of 3×3 μm.