Abstract
Low alloy sintered steels with an optimized content of alloying elements require the use of promising candidates such as Mn and Si which can provide improved properties with minimum contents at a lower and less volatile price. The introduction of these alloying elements in the form of a master alloy powder prevents, to some extent, the oxidation and allows a proper “tailoring” of its composition to accomplish particular goals. In this sense, low melting point alloys are especially interesting since they provide the formation of a liquid phase which enhances sintering and promotes the homogeneous distribution of the alloying elements within the compact.\ud In this work, the “product developing” process of master alloys containing Fe-Mn-Si is described, from the theoretical design to the sintering performance. Low melting point compositions were calculated by using ThermoCalc® software and successively manufactured by gas atomization. Liquid phase features are described in terms of melting temperatures and wetting behavior. The effects of the liquid phase (produced by the added master alloys) are studied by differential thermal analysis and dilatometry. Besides, to depict the behavior of liquid phase during heating, interrupted sintering experiments under high cooling rates were carriedfinancial\ud support provided by Ho¨gana¨ s AB Sweden, by the\ud MICINN Spain through project no. ENE2009-13766-\ud C04-03 and by CAM Spain through project no. S2009/\ud MAT-1585Peer reviewe