Characterization of Unistrut Connection Method with Pultruded Fiber-Reinforced Polymer Channels
Authors:
- 1 October 2006
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 18 (5) , 700-709
Abstract
This paper presents work to characterize the Unistrut steel connection method for M10 blind fixings using pultruded fiber- reinforced polymer (PFRP) profiles of channel section. Both the standard nut and a smooth nut (standard without the serrations), have been used in the series of tests to determine the degree of shear connection via load-slip behavior, under various applied bolt torques, and pure shear loading. It is shown that the standard nut provides adequate connection shear strength and stiffness, but with severe PFRP material damage that might be detrimental to the connection’s structural performance over or more. The smooth connection is shown to significantly reduce PFRP damage. However, this advantage is linked to a 35% reduction in the connection’s shear resistance, making it less suitable for the development of an economic connection. Preliminary hot/wet aging and creep tests are used to estimate the reduction in strength and stiffness with time. The test results are used to establish four Unistrut connection design parameters that are required for the development of lightweight modular systems of PFRP.
Keywords
This publication has 6 references indexed in Scilit:
- Friction and load transfer in bolted joints of pultruded fibre reinforced polymer section2004
- Designers' Guide to EN 1990 Eurocode: Basis of Structural Design2002
- Short- and long-term structural properties of pultruded beam assemblies fabricated using adhesive bondingComposite Structures, 1993
- Polymer Composites for Civil and Structural Engineering1993
- A study of glass fiber–epoxy composite interfacesPolymer Composites, 1989
- Effect of Moisture on Fatigue and Residual Strength Losses for Various CompositesJournal of Reinforced Plastics and Composites, 1987