FLOCCULATION, REINFORCEMENT, AND GLASS TRANSITION EFFECTS IN SILICA-FILLED STYRENE-BUTADIENE RUBBER
Authors:
- 1 December 2011
- journal article
- conference paper
- Published by Rubber Division, ACS in Rubber Chemistry and Technology
- Vol. 84 (4) , 507-519
Abstract
The introduction of silanes to improve processability and properties of silica-reinforced rubber compounds is critical to the successful commercial use of silica as a filler in tires and other applications. The use of silanes to promote polymer–filler interactions is expected to limit the development of a percolated filler network and may also affect the mobility of polymer chains near the particles. Styrene-butadiene rubber (SBR) was reinforced with silica particles at a filler volume fraction of 0.19, and various levels of filler–filler shielding agent (n-octyltriethoxysilane) and polymer–filler coupling agent (3-mercaptopropyltrimethoxysilane) were incorporated. Both types of silane inhibited the filler flocculation process during annealing the uncured rubber materials, thus reducing the magnitude of the Payne effect. In contrast to the significant reinforcement effects noted in the strain-dependent shear modulus, the bulk modulus from hydrostatic compression was largely unaltered by the silanes. Addition of polymer–filler linkages using the coupling agent yielded bound rubber values up to 71%; however, this bound rubber exhibited glass transition behavior which was similar to the bulk SBR response, as determined by calorimetry and viscoelastic testing. Modifying the polymer–filler interface had a strong effect on the nature of the filler network, but it had very little influence on the segmental dynamics of polymer chains proximate to filler particles.Keywords
This publication has 64 references indexed in Scilit:
- Polymer chain dynamics and glass transition in athermal polymer/nanoparticle mixturesNature Materials, 2009
- Heterogeneity of structural relaxation in a particle-suspension systemEurophysics Letters, 2007
- Controlling the thermomechanical properties of polymer nanocomposites by tailoring the polymer–particle interfaceJournal of Polymer Science Part B: Polymer Physics, 2006
- Isoenergetic Jamming Transition in Particle-Filled SystemsPhysical Review Letters, 2005
- Glass transition and molecular dynamics in poly(dimethylsiloxane)/silica nanocompositesPolymer, 2005
- Thermal aging of carbon black filled rubber compounds. I. Experimental evidence for bridging flocculationPolymer, 2003
- The glass transition and interfacial layer in styrene-butadiene rubber containing silica nanofillerPolymer, 2003
- Characterization of dispersion state of filler and polymer-filler interactions in rubber-carbon black compositesJournal of Materials Science, 1996
- The bulk modulus of rubberPolymer, 1994
- Carbon black filled natural rubber. 1. Structural investigationsMacromolecules, 1991