Parameter Optimization Of Natural Hydroxyapatite/SS316l Via Metal Injection Molding (MIM)
Open Access
- 12 January 2017
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 165 (1) , 012015
Abstract
Metal injection molding (MIM) are well known as a worldwide application of powder injection molding (PIM) where as applied the shaping concept and the beneficial of plastic injection molding but develops the applications to various high performance metals and alloys, plus metal matrix composites and ceramics. This study investigates the strength of green part by using stainless steel 316L/ Natural hydroxyapatite composite as a feedstock. Stainless steel 316L (SS316L) was mixed with Natural hydroxyapatite (NHAP) by adding 40 wt. % Low Density Polyethylene and 60 %wt. Palm Stearin as a binder system at 63 wt. % powder loading consist of 90 % wt. of SS316 L and 10 wt. % NHAP prepared thru critical powder volume percentage (CPVC). Taguchi method was functional as a tool in determining the optimum green strength for Metal Injection Molding (MIM) parameters. The green strength was optimized with 4 significant injection parameter such as Injection temperature (A), Mold temperature (B), Pressure (C) and Speed (D) were selected throughout screening process. An orthogonal array of L9 (3) 4 was conducted. The optimum injection parameters for highest green strength were established at A1, B2, C0 and D1 and where as calculated based on Signal to Noise Ratio.Keywords
This publication has 24 references indexed in Scilit:
- The effects of material attributes on powder–binder separation phenomena in powder injection moldingPowder Technology, 2013
- Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating slidingWear, 2013
- The influence of calcination parameters on free calcium oxide content in natural hydroxyapatiteCeramics International, 2012
- Processing of a natural hydroxyapatite powder: From powder optimization to porous bodies developmentJournal of the European Ceramic Society, 2011
- Rheological Investigation of Water Atomized Metal Injection Molding (MIM) Feedstock for Processibility PredictionAdvanced Materials Research, 2009
- Fabrication of metal matrix composites by metal injection molding—A reviewJournal of Materials Processing Technology, 2008
- Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell partMaterials & Design (1980-2015), 2007
- Characterization of powder injection molding feedstockMaterials Characterization, 2002
- Ti-6A1-4V/HA composite feedstock for injection moldingMaterials Letters, 2002
- Binder system for micropowder injection moldingMaterials Letters, 2001