Experimental Investigation of Concrete Cylinders Confined with PBO FRCM Exposed to Elevated Temperatures
Open Access
Abstract
Externally bonded fiber-reinforced polymers (FRPs) have been widely used for strengthening and retrofitting applications. However, their efficacy is hindered by the poor resistance of their epoxy resins to elevated temperatures and their limited compatibility with concrete substrates. To address these limitations, fabric-reinforced cementitious matrix (FRCM), also known as textile reinforced mortar (TRM), systems have emerged as an alternative solution. In this study, experimental tests were performed on concrete cylinders confined with FRCM systems that consisted of mineral mortar and poliparafenilenbenzobisoxazole fabric (PBO). The cylinders with concrete strengths of 30, 45, and 70 MPa, were confined with one or two FRCM layers, and were subjected to different target temperatures (100, 400, and 800 °C). The experimental results highlighted the confinement effect of FRCMs on the compressive strength of the tested cylinders. Cylinders exposed to 100 °C exhibited a slight increase in their compressive strength, while no specific trend was observed in the compressive strength of cylinders heated to 400 °C. Specimens heated up to 800 °C experienced a significant reduction in strength, reaching up to 82%.Keywords
Funding Information
- Office of Sponsored Research at the American University of Sharjah, UAE (FRG19-L-E23)
This publication has 19 references indexed in Scilit:
- Structural performances of thermally conditioned PBO FRCM confined concrete cylindersComposite Structures, 2017
- Fabric-reinforced cementitious matrix behavior at high-temperature: Experimental and numerical resultsComposites Part B: Engineering, 2017
- Long term performance and fire safety aspect of FRP composites used in building structuresConstruction and Building Materials, 2016
- Effect of elevated temperature environments on the residual axial capacity of RC columns strengthened with different techniquesConstruction and Building Materials, 2016
- Fire behaviour of FRP-strengthened reinforced concrete structural elements: A state-of-the-art reviewComposites Part B: Engineering, 2015
- Analysis of the bond between Fabric Reinforced Cementitious Mortar (FRCM) strengthening systems and concreteComposites Part B: Engineering, 2015
- Properties of Concrete at Elevated TemperaturesISRN Civil Engineering, 2014
- The effect of high temperature on the performance of CFRP and FRCM confined concrete elementsComposites Part B: Engineering, 2013
- Residual Mechanical Properties of High-Strength Concretes after Exposure to Elevated TemperaturesJournal of Materials in Civil Engineering, 2010
- Comparison between high strength concrete and normal strength concrete subjected to high temperatureMaterials and Structures, 1996