Improving Economics of Generation 3 CSP System Components Through Fabrication and Application of High Temperature Nickel-Based Alloys
Open Access
- 23 November 2022
- report
- Published by Office of Scientific and Technical Information (OSTI)
Abstract
To improve the efficiency and lower the cost of Concentrating Solar Power (CSP) plants, new Generation 3 ‘Gen 3’ CSP concepts using novel salts, solids, or gas heat-transfer media envisaged to integrated with a supercritical CO2 (sCO2) power block at temperatures >715ºC are being investigated. Regardless of the specific pathway, critical components including receivers, piping, and heat-exchangers (HXs) will require the use of heat-resistant nickel-based alloys. Furthermore, the use of age-hardenable alloys, such as INCONEL® alloy 740H® (alloy 740H) may be needed to reduce capital cost. The unique challenges presented by CSP plants to material manufacture, such as small diameter thin-walled tubing in receivers, large diameter thin wall piping, and thin sheet and tubes for HXs can add to the cost to produce such alloys when compared to traditional wrought and cast processing. The goal of this project was to facilitate a reduction of plant cost by developing alternate manufacturing routes and quantifying the performance and economic benefits for alloy 740H in comparison to other candidate nickel-based alloys through fabrication trials, high-temperature mechanical property studies, and interactions with technology developers and codes and standards. The project reached it goals with the following accomplishments and new learnings: • A successful industrialmore » demonstration of thin-wall autogenous welded tube production and welded+redrawn tubing for alloy 740H to multiple sizes met or exceeded qualification tests. A unique pressurized tube long-term creep test was developed, and the creep data on the fabricated tubing identified appropriate reduction factors for application. Tubing was supplied to Gen 3 CSP teams and was successfully fabricated into demonstration articles. A new ASME Section VIII code case was developed including the use of this product form. • A first-of-a-kind alloy 740H large diameter welded pipe was produced. The application of a post fabrication solution annealing and aging heat-treatment was demonstrated, using creep testing to >10,000hours, to improve the high-temperature weldment strength from the current ASME weld strength reduction factor (WSRF) of 0.7 to >0.9. Detailed metallurgical evaluation identified the damage mechanisms and scientific basis for the improvement. A datapackage was provided to ASME and is currently in ballot to utilize this new WSRF. • A fundamental creep study on alloy 740H sheets for use in diffusion bonded and other compact heat exchanger designs was completed and is being used as a technical basis for improving the understanding of the importance of fabrication on high-temperature component performance • A techno-economic study concluded the use of alloy 740H combined with these advanced manufacturing practices could reduce capital costs by 20 to 40% for many Gen 3 CSP components. Overall, the project engaged the three main Gen 3 pathway teams and collaborative partners throughout the overall project providing valuable guidance on materials and manufacturing to help accelerate the overall goal to reduce the cost of Gen 3 CSP. « lessKeywords
Funding Information
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Solar Energy Technologies Office
- DOE (EE0008367)
This publication has 12 references indexed in Scilit:
- Relationship between Grain Size and Sample Thickness on the Creep-Rupture Performance of Thin Metallic Sheets of INCONEL Alloy 740HJournal of Materials Engineering and Performance, 2023
- Development and performance of INCONEL® alloy 740H® seam-welded pipingInternational Journal of Pressure Vessels and Piping, 2022
- Development of an Open-source Alloy Selection and Lifetime Assessment Tool for Structural Components in CSP2022
- Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740HInternational Journal of Pressure Vessels and Piping, 2021
- Effect of temperature on abrasion erosion in particle based concentrating solar powerplantsSolar Energy, 2021
- Concentrating solar power (CSP) power cycle improvements through application of advanced materialsAIP Conference Proceedings, 2016
- Influences of composition and grain size on creep–rupture behavior of Inconel® alloy 740Materials Science and Engineering: A, 2013
- A Unified View of Engineering Creep Parameters2008
- U.S. Program on Materials Technology for Ultra-Supercritical Coal Power PlantsJournal of Materials Engineering and Performance, 2005
- Low cycle fatigue of tubular specimensScripta Metallurgica, 1983