Spark–Ignition Engine Fuel Consumption Modeling
Authors:
- 1 March 1999
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
An analytical model that describes SI engine fuel consumption and friction with basic engine physical parameters as inputs has been developed and evaluated in this study. Fundamental characteristics of SI engine indicated efficiency, heat loss and friction have been captured by the model. Despite the approximations made in arriving at the final formula of the model, the proposed fuel–rate equation has been shown to represent both the SI engine fuel consumption and WOT friction reasonably well with a base set of parameters. If both the engine performance data and motored WOT friction data are available, the proposed model can be used to obtain a more precise set of parameters that describe both the engine friction and fuel consumption accurately (fuel rate differences within ±5%) at any speed and load combinations (omitting enrichment points).Keywords
This publication has 12 references indexed in Scilit:
- Modeling of Direct Injection Diesel Engine Fuel ConsumptionSAE International Journal of Advances and Current Practices in Mobility, 1997
- Off-Cycle Exhaust Emissions from Modern Passenger Cars with Properly-Functioning Emissions ControlsSAE International Journal of Advances and Current Practices in Mobility, 1996
- Estimate of Total Engine Loss and Engine Output in Four Stroke S.I. EnginesSAE International Journal of Advances and Current Practices in Mobility, 1991
- Development and Evaluation of a Friction Model for Spark-Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1989
- Factors Limiting the Improvement in Thermal Efficiency of S. I. Engine at Higher Compression RatioSAE International Journal of Advances and Current Practices in Mobility, 1987
- General Motors 2.3L Quad 4 EngineSAE International Journal of Advances and Current Practices in Mobility, 1987
- Development and Use of a Cycle Simulation to Predict SI Engine Efficiency and NOx EmissionsSAE International Journal of Advances and Current Practices in Mobility, 1979
- Heat Balance Provides Insight into Modern Engine Fuel UtilizationSAE International Journal of Advances and Current Practices in Mobility, 1977
- Engine Cycle Simulations and Comparisons to Real Engine PerformanceSAE International Journal of Advances and Current Practices in Mobility, 1976
- A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion EngineSAE International Journal of Advances and Current Practices in Mobility, 1967