Poly‐l‐Lactic Acid/Graphene Electrospun Composite Nanofibers for Wearable Sensors
- 28 January 2020
- journal article
- research article
- Published by Wiley in Energy Technology
- Vol. 8 (5)
Abstract
Piezoelectric organic films as flexible and wearable pressure sensors are ideal materials for manufacturing of electronic skin. Poly‐l‐lactic acid (PLLA)/graphene composite nanofibers are fabricated by electrospinning. The relative crystallinity of the PLLA/graphene electrospun composite nanofibers increases from 9% to 30%. The d14 value of sample K0.1 (d14 = 9.02 pC N−1) increases by 2048% compared with sample K0 (d14 = 0.42 pC N−1). Piezoelectric bioelectronic skin is fabricated using the PLLA/graphene electrospun nanofiber mat, polyester fabric, and poly(dimethylsiloxane) (PDMS). The maximum open‐circuit voltage (Voc) and short‐circuit current (Isc) of the wearable sensors are 184.6 V and 10.8 μA. The response generated by touching the bioelectronic skin can be converted to a digital signal. The piezoelectric bioelectronic skin is used to monitor the pulse of the human body. Based on the results, a pulse of 76 beats min−1 is calculated, which coincides with the normal human heart rate interval (60–100 beats min−1). The addition of graphene influences the fiber diameters, thermal stability, relative crystallinity, and the piezoelectric properties along the fiber axial direction (d14) of PLLA. This small, flexible sensor, which can achieve high sensitivity, can be used for physiological and health care monitoring phonetic recognition.Keywords
This publication has 41 references indexed in Scilit:
- Crystallization behaviors of biodegradable poly(l-lactic acid)/graphene oxide nanocomposites from the amorphous stateThermochimica Acta, 2011
- Crystal modifications and multiple melting behavior of poly(L‐lactic acid‐co‐D‐lactic acid)Journal of Polymer Science Part B: Polymer Physics, 2010
- Isothermal Crystallization of Poly(l-lactide) Induced by Graphene Nanosheets and Carbon Nanotubes: A Comparative StudyMacromolecules, 2010
- Raman Spectroscopic Characterization of GrapheneApplied Spectroscopy Reviews, 2010
- Poly(L‐lactide) crystallization induced by multiwall carbon nanotubes at very low loadingJournal of Polymer Science Part B: Polymer Physics, 2009
- Large Area, Few-Layer Graphene Films on Arbitrary Substrates by Chemical Vapor DepositionNano Letters, 2008
- Towards Self‐Powered Nanosystems: From Nanogenerators to NanopiezotronicsAdvanced Functional Materials, 2008
- Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire ArraysScience, 2006
- Electric‐field‐induced chain orientation in poly(L‐lactic acid)Journal of Polymer Science Part B: Polymer Physics, 2004
- Effect of Catalyst and Polymerization Conditions on the Preparation of Low Molecular Weight Lactic Acid PolymersMacromolecules, 1997