A dual-band VCO using inductor splitting for automotive radar system at W-band
Authors:
- 1 December 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23250631,p. 168-171
Abstract
A dual-band VCO (Voltage Controlled Oscillator) for automotive radar system is proposed by 65nm CMOS process. The proposed VCO is splitting inductor and NMOS cross-coupled differential LC type and includes output matching buffer. The output frequencies of VCO are 76.4~77.1GHz and 78.5~ 80GHz. These frequency bands are proper to long-range and short-range radar sensor system of automotive radar at W-band. The simulation results show the output power of -8.4dBm and the phase noise of -90.8dBc/Hz at 1MHz offset and -113.3dBc/Hz at 10MHz offset. The power consumption of the proposed VCO is 30mW at the supply voltage of 1.2V. The proposed VCO shows good figure of merit (FOM) of -176.6dBc/Hz.Keywords
This publication has 5 references indexed in Scilit:
- A 33.6-to-46.2GHz 32nm CMOS VCO with 177.5dBc/Hz minimum noise FOM using inductor splitting for tuning extension2013
- Transfer function analysis for model topology determination of on-chip transmission lines2011
- A 1mW 5GHz current reuse CMOS VCO with low phase noise and balanced differential outputs2011
- 77 GHz signal generator with CMOS technology for automotive radar application2011
- A 77GHz CMOS VCO with 11.3GHz tuning range, 6dBm output power, and competitive phase noise in 65nm bulk CMOS2011