An investigation into the ball burnishing of aluminium alloy 6061-T6
Author:
- 1 December 2007
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 221 (12) , 1733-1742
Abstract
Burnishing has been widely used to produce excellent surface finish, work hardening, and compressive residual stress by plastically deforming the workpiece surface. There have been very few studies concerning the effect of burnishing parameters on the fatigue life. The purpose of this work is to study the relationships between the fatigue life, the residual stress, and the ball burnishing process parameters. Experimental work was carried out on a lathe to establish the effect of three burnishing parameters, namely the burnishing speed, burnishing force, and burnishing feed, on the residual stress and fatigue life of aluminium alloy 6061-T6. The residual stress distribution in the surface region due to ball burnishing is determined using a deflectionetching technique. The number of cycles to failure is determined for each specimen using a universal-type fatigue machine, which is suitable for testing specimens requiring oscillatory or reciprocating motion. It was found that all input parameters have controlling effects, to different extents, on the residual stress and fatigue life. The results showed that the residual stress plays an important role in controlling the behaviour of fatigue. The burnishing force and burnishing feed are the most important parameters controlling the values of the compressive residual stress which, in turn, delay crack initiation, resulting in an increase in the fatigue life.Keywords
This publication has 22 references indexed in Scilit:
- Quality improvement of ball-end milled sculptured surfaces by ball burnishingInternational Journal of Machine Tools and Manufacture, 2005
- Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrityInternational Journal of Machine Tools and Manufacture, 2001
- An investigation into roller burnishingInternational Journal of Machine Tools and Manufacture, 2000
- Influence of burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metalsWear, 1996
- Ball burnishing of 316L stainless steelJournal of Materials Processing Technology, 1993
- An investigation into the ball burnishing of an AISI 1045 free-form surfaceJournal of Materials Processing Technology, 1992
- Designating the field areas for the contact of a rotary burnishing element with the rough surface of a part, providing a high-quality productJournal of Materials Processing Technology, 1989
- Statistical analyses of the effects of ball burnishing parameters on surface hardnessWear, 1989
- A study of the effects of ball-burnishing parameters on surface roughness using factorial designJournal of Materials Processing Technology, 1989
- Investigations into the burnishing of external cylindrical surfaces of Cu-Zn alloyWear, 1988