The Influence of Selected Parameters of Recycled Polyvinyl Butyral on the Sustainable Filament Extrusion Process
Open Access
- 25 October 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9752
Abstract
In recent years, sustainability has permeated nearly every aspect of our lives, and the manufacturing sector is no exception. The terms “sustainable manufacturing” and “zero-waste manufacturing” are now part of our everyday vocabulary. This study, which explores the influence of key parameters on the filament extrusion process using recycled polyvinyl butyral (PVB), which is an amorphous polymer commonly obtained from the glass recycling industry, has significant practical implications. By determining the optimal conditions for the extrusion process, we can enhance the mechanical properties of the produced PVB filament yarns and their printability. As a result of identifying errors, optimizing the process, and eliminating the resulting shortcomings, a fiber made of PVB material with a diameter of 1.75 mm (±0.06 mm) was created that can be used in most FDM devices. The length of the created fiber was approx. 20 m, and in the presentation of the results, it will be used for printing samples, adhesion tests to the printing mat, shrinkage tests, and tensile tests of the fiber. After removing all the shortcomings, the ideal extrusion temperature was at 155 °C. This temperature was verified using microscopic cross-sections, and deformations or changes were observed in their cross-sections. The deviation of the material currently undergoing testing for the adhesion of PVB to various types of print beds, which was found suitable for use in FFF devices, was 1.75 −0.25/+0.25. This, in turn, can significantly expand the application of these materials in additive manufacturing, thereby making a substantial contribution to the advancement of sustainable manufacturing.Keywords
Funding Information
- Ministerstvo školstva, vedy, výskumu a športu Slovenskej republiky (VEGA 1/0268/22)
This publication has 38 references indexed in Scilit:
- Towards optimization of polymer filament tensile test for material extrusion additive manufacturing processJournal of Materials Research and Technology, 2023
- Inorganic fullerene-like tungsten disulfide/waterborne polyurethane reinforced Spectra® composites with improved mechanical properties and tensile energy absorptionResults in Materials, 2023
- Simulation of PVB-glass adhesion and its influence on the blast protection properties of laminated safety glassInternational Journal of Impact Engineering, 2022
- Polyvinyl Butyral (PVB) as a Significant Material Used by Additive Manufacturing2022
- Process parameter determination for small recycling plants for the production of filament for FFF printing using the Taguchi methodProgress in Additive Manufacturing, 2021
- Comparative Analysis on Strength Properties of Fabric Using Intra-layer Polyvinyl Butyral-paste SpinningFibers and Polymers, 2021
- Assessment of 3D printing using fused deposition modeling and selective laser sintering for a circular economyJournal of Cleaner Production, 2020
- Systematic experimental study on mechanical behavior of PVB (polyvinyl butyral) material under various loading conditionsPolymer Engineering & Science, 2012
- Experimental study on mechanical behavior of PVB laminated glass under quasi-static and dynamic loadingsComposites Part B: Engineering, 2011
- The characterization of polyvinyl butyral by thermal analysisThermochimica Acta, 2002