Nanofluids as Coolants to Improve the Thermal Management System of a High-Power Aircraft Electric Motor
Open Access
- 25 February 2025
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 14 (5) , 911
Abstract
Electrification has become increasingly common in aerospace due to climate change concerns. After successful applications in general aviation aircraft, electrification is now addressing subregional (up to 19 passengers) and regional aircraft (around 80 passengers). Megawatt-class electric motors are needed both to drive propellers and to act as high-power generators in hybrid–electric propulsion systems. Power levels for this class of aircraft require a proper design of heat management systems capable of dissipating a much higher quantity of heat than that dissipated by traditional cooling systems. The technical solution here explored is based on the addition into a diathermic base liquid of nanoparticles, which can increase (by up to 30%) the thermal conductivity of the refrigerant, also providing large surface area enhancing the heat transfer capacity of base liquids. The Italian Aerospace Research Centre (CIRA), as part of the European research initiative Optimised Electric Network Architectures and Systems for More-Electric Aircraft (ORCHESTRA), developed a thermal management system (TMS) based on impinging jets technology for a 1 MW electric motor. In this work, a numerical verification of the possibility for nanofluids to improve the heat exchange efficiency of a submerged oil impinging jets TMS designed to directly cool the inner components of a 1 MW motor is conducted. Investigations aimed to analyse two nanoparticle types (alumina and graphite) added to diathermic oil with concentrations between 1% and 5% by volume. The application of nanofluids significantly increases final thermal conductivity with respect to conventional coolants, a 60% improvement in heat transfer at a fixed mass flow rate is achieved. Electric motor maximum temperatures are approximately 10% lower than those achieved with solely diathermic oil. This result is significant as a safety margin is needed in all cases where a sudden increase in power occurs.Keywords
All Related Versions
Funding Information
- CIRA (21-COM-0059)
This publication has 50 references indexed in Scilit:
- Colloidal stability and degradability of silica nanoparticles in biological fluids: a reviewJournal of Sol-Gel Science and Technology, 2022
- Nanofluids: preparation, stability, properties, and thermal performance in terms of thermo-hydraulic, thermodynamics and thermo-economic analysisJournal of Thermal Analysis and Calorimetry, 2021
- A review on nanofluid: preparation, stability, thermophysical properties, heat transfer characteristics and applicationSN Applied Sciences, 2020
- An updated review of nanofluids in various heat transfer devicesJournal of Thermal Analysis and Calorimetry, 2020
- Developments and future insights of using nanofluids for heat transfer enhancements in thermal systems: a review of recent literatureInternational Nano Letters, 2019
- Experimental investigation of optimum thermal performance and pressure drop of water-based Al2O3, TiO2 and ZnO nanofluids flowing inside a circular microchannelJournal of Thermal Analysis and Calorimetry, 2017
- Solid-like heat transfer in confined liquidsMicrofluidics and Nanofluidics, 2017
- Role of temperature on thermal conductivity of nanofluids: a brief literature reviewHeat and Mass Transfer, 2016
- Experimental investigation of submerged single jet impingement using Cu–water nanofluidApplied Thermal Engineering, 2012
- Advances in Turbulence1987