Effects of both the drive- and sense-mode circuit phase delay on MEMS gyroscope performance and real-time suppression of the residual fluctuation phase error
- 1 April 2021
- journal article
- research article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 31 (5) , 055006
Abstract
This work analyses circuit phase delay for carrier-modulation MEMS capacitive gyroscopes. The temperature-dependent circuit phase delay is a major source of gyroscope output drift, which deteriorates the gyroscope bias instability (BI) and angle random walk (ARW). Effects of both drive-mode and sense-mode circuit phase delay on gyroscope performance when using different signal extraction architectures are analyzed in detail. The online suppression method which combines the so-called modified double sideband (MDSB) extraction architecture in the gyroscope drive mode and closed-loop force-rebalance loop in the sense mode can eliminate the impact of residual fluctuation error of circuit phase delay in real time. When drive-mode circuit phase delay equivalently varies from −20° to 20°, using MDSB decreases the fluctuation of the open-loop zero-rate output (ZRO) by 70% compared to using double sideband (DSB) and by 99.7% with respect to using single sideband (SSB). Meanwhile, improvement for the closed-loop ZRO using MDSB is 92.48% and 94% compared to cases using DSB and SSB, respectively. Furthermore, when the equivalent circuit phase delay of the sense-mode alters from −20° to 20°, ZRO variation for the gyroscope with force rebalanced sense loop and quadrature stiffness nulling loop decreases by 80% in contrast to the case with open loop, which demonstrates the effectiveness of online suppression for circuit phase delay of both the drive-mode and sense-mode. Using the online suppression method, the gyroscope has achieved a BI of 0.16° h −1 and ARW of 0.011° (√h) −1 . Furthermore, using the MDSB in the drive mode obtains the best stability compared to using the DSB and SSB as the temperature changes.Keywords
Funding Information
- National Science Fund for Distinguished Young Scholars of China (61525403)
- Zhejiang Provincial Basic Public Welfare Research Program of China (GG20F040007)
This publication has 20 references indexed in Scilit:
- Development of a complete model to evaluate the Zero Rate Level drift over temperature in MEMS Coriolis Vibrating Gyroscopes2017
- A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation techniqueJournal of Micromechanics and Microengineering, 2016
- The Development of Micromachined Gyroscope Structure and Circuitry TechnologySensors, 2014
- Closed loop control design for the sense mode of micromachined vibratory gyroscopesScience China Technological Sciences, 2013
- Quadrature-Error Compensation and Corresponding Effects on the Performance of Fully Decoupled MEMS GyroscopesJournal of Microelectromechanical Systems, 2012
- Transient response and stability of the AGC-PI closed-loop controlled MEMS vibratory gyroscopesJournal of Micromechanics and Microengineering, 2009
- The development of micro-gyroscope technologyJournal of Micromechanics and Microengineering, 2009
- Process flow improvement on a bulk micromachined gyroscopeMicro & Nano Letters, 2009
- Zero-Rate Output and Quadrature Compensation in Vibratory MEMS GyroscopesIEEE Sensors Journal, 2007
- Micromachined inertial sensorsProceedings of the IEEE, 1998