Efficiency Improvement of Chemical Looping Combustion Combined Cycle Power Plants
Open Access
- 27 August 2019
- journal article
- research article
- Published by Wiley in Energy Technology
- Vol. 7 (11)
Abstract
Chemical‐looping combustion (CLC) is an innovative technology for power production with inherent carbon dioxide (CO2) capture. Even though CLC imposes no direct energy penalty for CO2 capture, previous works have shown significant energy penalties relative to natural gas (NG) combined cycle plants. This is due to the relatively low turbine inlet temperature (TIT), which is limited by the oxygen carrier used in the CLC process. Therefore, herein, an additional combustor (COMB) is included downstream of the CLC unit to raise the TIT (dependent on the CLC/COMB outlet temperature [COT] and the blade cooling). When NG is used in the additional COMB, the energy penalty is only 2.9% points with 72% CO2 capture. Achieving higher CO2 capture requires the use of H2 fuel in the COMB. The efficiency of the H2 production process plays an important role. For conventional H2 production with post‐combustion CO2 capture, the added COMB brings no improvement and the energy penalty is 8.8% points. For an advanced H2 production process (90% efficiency), the energy penalty reduces to 4.5% points with 100% CO2 capture. The results show the potential of CLC‐combined cycle power plants with an additional COMB to minimize the energy penalty of CO2 capture.Keywords
Funding Information
- Norges Forskningsråd (255462)
This publication has 41 references indexed in Scilit:
- Pressurized chemical-looping combustion of coal using an iron ore as oxygen carrier in a pilot-scale unitInternational Journal of Greenhouse Gas Control, 2012
- NGCC and Hard-Coal Power Plant with CO2 Capture Based on AbsorptionEnergy Procedia, 2012
- Chemical looping combustion of coke oven gas by using Fe2O3/CuO with MgAl2O4 as oxygen carrierEnergy & Environmental Science, 2010
- Three-reactors chemical looping process for hydrogen productionInternational Journal of Hydrogen Energy, 2008
- Packed Bed Reactor Technology for Chemical-Looping CombustionIndustrial & Engineering Chemistry Research, 2007
- Using steam reforming to produce hydrogen with carbon dioxide capture by chemical-looping combustionInternational Journal of Hydrogen Energy, 2006
- Parametric study of chemical looping combustion for tri-generation of hydrogen, heat, and electrical power with CO2 captureInternational Journal of Energy Research, 2005
- Combustion of natural gas with high-temperature air and large quantities of flue gasProceedings of the Combustion Institute, 2000
- CO2 recovery in a power plant with chemical looping combustionEnergy Conversion and Management, 1997
- A new advanced power-generation system using chemical-looping combustionEnergy, 1994