Design of a 0.20–0.25-V, Sub-nW, Rail-to-Rail, 10-bit SAR ADC for Self-Sustainable IoT Applications
- 26 September 2018
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 66 (5) , 1840-1852
Abstract
This paper presents a 10-bit SAR ADC operating at a supply voltage (VDD) from 0.200 to 0.250 V. In the proposed ADC structure, the positive input of the comparator is fixed at VDD to bias the comparator's input transistor pair with a sufficient gate-to-source voltage at such a low VDD. We propose an ultra-low VDD temperature-compensated bias generator to bias the comparator for addressing the severe temperature-dependent issue of the MOSFETs in the comparator, which operate in the deep subthreshold region. Detailed circuit analysis and derivation of design requirements are presented. A double-boosted and low-leakage sampling switch is also proposed to alleviate the severe leakage issue at low sampling rates. A test chip has been designed and fabricated in 180-nm CMOS. The ADC core occupies only 0.024 mm². Measurement results show that the ADC achieves stable performance in the VDD range. At 0.225 V, the DNL and INL are within +1.04/-0.66 and +0.97/-1.04 LSB in the rail-to-rail input range, respectively. The measured peak SNDR at the Nyquist input frequency is 49.2 dB at 450 S/s. The whole ADC totally consumes 0.85 nW at 0.225 V including circuit leakages. The sub-nW power consumption makes it well suited for self-sustainable Internet-of-Things applications.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST-107-2633-E-009-003, MOST-106-2221-E-009-166-MY3, MOST-104-2221-E-009-156-MY3, MOST-104-2221-E-009-157-MY2)
This publication has 19 references indexed in Scilit:
- A 0.4-V Subnanowatt 8-Bit 1-kS/s SAR ADC in 65-nm CMOS for Wireless Sensor ApplicationsIEEE Transactions on Circuits and Systems II: Express Briefs, 2016
- Low ${\rm VDDmin}$ Swing-Sample-and-Couple Sense Amplifier and Energy-Efficient Self-Boost-Write-Termination Scheme for Embedded ReRAM Macros Against Resistance and Switch-Time VariationsIEEE Journal of Solid-State Circuits, 2015
- Energy Optimized Subthreshold VLSI Logic Family With Unbalanced Pull-Up/Down Network and Inverse Narrow-Width TechniquesIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2015
- A 0.3 V 10-bit 1.17 f SAR ADC With Merge and Split Switching in 90 nm CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- A 10 bit SAR ADC With Data-Dependent Energy Reduction Using LSB-First Successive ApproximationIEEE Journal of Solid-State Circuits, 2014
- 11.2 A 0.85fJ/conversion-step 10b 200kS/s subranging SAR ADC in 40nm CMOS2014
- A 0.2$-\hbox{1.2}$ V DC/DC Boost Converter for Power Harvesting ApplicationsIEEE Transactions on Power Electronics, 2009
- Managing Subthreshold Leakage in Charge-Based Analog Circuits With Low-$V_rm TH$Transistors by Analog T- Switch (AT-Switch) and Super Cut-off CMOS (SCCMOS)IEEE Journal of Solid-State Circuits, 2006
- Leakage current mechanisms and leakage reduction techniques in deep-submicrometer CMOS circuitsProceedings of the IEEE, 2003
- A low-voltage low-power voltage reference based on subthreshold MOSFETsIEEE Journal of Solid-State Circuits, 2003