A complete numerical model for low temperature composite form-stable phase change material slab based on dynamically simplified temperature transforming method
- 16 June 2021
- journal article
- research article
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 47 (1) , 9155-9180
Abstract
Phase change material (PCM) that is used in the roof top slab can minimize the heat infiltration into the living space from the building envelope and increase the indoor thermal comfort level. The major disadvantage of PCM is leakage at liquid state. Expanded graphite (EG) is used here as supporting material for PCM to prevent the leakage and maintains the form stability. The composite PCMs are prepared by adding the EG with various mass ratios, i.e. 3%, 6%, and 9%. The thermal properties of all composite PCMs are determined by DSC and thermal conductivity analyzer. The optimum PCM composition was found at 9% of EG. In this study, the shape-stabilized PCM-integrated roof top was analyzed by simplified temperature transforming (TT) numerical model. The main advantage of this model is that it is used to combine the equivalent enthalpy and heat capacity. The numerical results are validated with experimental values and show the lower mean absolute percentage error (MAPE), i.e. 6.91%. This indicates that present model is well suitable to predict the thermal performance of composite PCM incorporated roof top. The effect of various parameters like thickness of the PCM slab, wind velocity, percentage of EG mass ratio, and location of PCM are investigated by simplified TT model. The results showed that the maximum inner surface temperature reach up to 53°C for BG model (concrete and gypsum) by distributing constant heat flux, i.e. 1,000 W/m2 for 180 min. At this same condition, the inner surface temperature of other PCM models PBG (PCM, concrete, gypsum) and BPG (concreate, PCM, Gypsum) reaches to 50°C and 41°C, respectively. PBG model exhibits excellent thermal performance compared to BPG model. The thermal performance of PCM slab is also investigated by varying the thickness of the PCM layer and found that time lag is raised with the thickness of the PCM slab.Keywords
This publication has 29 references indexed in Scilit:
- Numerical model for evaluating thermal performance of residential building roof integrated with inclined phase change material (PCM) layerJournal of Building Engineering, 2020
- Phase change materials and energy efficiency of buildings: A review of knowledgeJournal of Energy Storage, 2020
- Development and experiment validation of variable-resistance-variable-capacitance dynamic simplified thermal models for shape-stabilized phase change material slabApplied Thermal Engineering, 2019
- Numerical investigation of inward solidification inside spherical capsule by using temperature transforming methodAin Shams Engineering Journal, 2018
- Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildingsSolar Energy Materials and Solar Cells, 2015
- Numerical study on the thermal performance of building wall and roof incorporating phase change material panel for passive cooling applicationEnergy and Buildings, 2014
- A numerical study of external building walls containing phase change materials (PCM)Applied Thermal Engineering, 2012
- Experimental investigation of preparation and thermal performances of paraffin/bentonite composite phase change materialEnergy Conversion and Management, 2011
- Encapsulated Fatty Acids in an Acrylic Resin as Shape-stabilized Phase Change Materials for Latent Heat Thermal Energy StorageEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2008
- Heat Transfer Characteristics and Optimum Insulation Thickness for Cavity WallsJournal of Thermal Envelope and Building Science, 2003