Effect of Sandblasting Angle and Distance on Biaxial Flexural Strength of Zirconia-based Ceramics
- 1 June 2017
- journal article
- Published by Jaypee Brothers Medical Publishing in The Journal of Contemporary Dental Practice
- Vol. 18 (6) , 443-447
Abstract
Aim: Surface treatment is necessarily required for bonding of zirconia to the veneering porcelain and luting cements. Sandblasting is the most common and probably the most efficient surface treatment method. Sandblasting roughens the surface and may affect the flexural strength of zirconia. Different sandblasting protocols may yield variable results. This study sought to assess the effect of sandblasting angle and distance on the biaxial flexural strength of zirconia-based ceramics.Materials and methods: Thisin vitroexperimental study was conducted on 50 zirconia discs measuring 1.2 ± 0.2 mm in thickness and 15 ± 0.2 mm in diameter, which were randomly divided into five groups (n = 10) of one control and four experimental groups subjected to sandblasting with 110 µm aluminum oxide particles under 2 bar pressure for 10 seconds at 15 and 25 mm distances and 45 and 90° angles (between the nozzle head and zirconia surface). Surface roughness was measured by a roughness tester and samples were subjected to thermocycling followed by biaxial flexural strength testing according to ISO6872. The data were analyzed using one-way analysis of variance (p < 0.05).Results: No statistically significant difference was noted in the mean biaxial flexural strength of the five groups (p = 0.40). Different sandblasting protocols yielded significantly different surface roughness values (p < 0.001). The highest and the lowest mean surface roughness belonged to 15 mm/90° (0.51 µm) and control (0.001 µm) groups respectively.Conclusion: Change in sandblasting angle and distance had no significant effect on the biaxial flexural strength of zirconiabased ceramic, but surface roughness was significantly different in the study groups.Clinical significances: Regardless of sandblasting angle, increasing distance to 25 mm significantly decreases surface roughness that may negatively affect zirconia bond strength.How to cite this article: Zeighami S, Gheidari A, Mahgoli H, Rohanian A, Ghodsi S. Effect of Sandblasting Angle and Distance on Biaxial Flexural Strength of Zirconia-based Ceramics. J Contemp Dent Pract 2017;18(6):443-447.Keywords
This publication has 34 references indexed in Scilit:
- Adhesion/cementation to zirconia and other non-silicate ceramics: Where are we now?Dental Materials, 2011
- A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practiceJournal of Dentistry, 2009
- Surface modification for enhanced silanation of zirconia ceramicsDental Materials, 2009
- Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y‐TZP ceramicsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2009
- Y-TZP Ceramics: Key Concepts for Clinical ApplicationOperative Dentistry, 2009
- Randomized controlled clinical trial of customized zirconia and titanium implant abutments for canine and posterior single‐tooth implant reconstructions: preliminary results at 1 year of functionClinical Oral Implants Research, 2009
- Hydroxylation of dental zirconia surfaces: Characterization and bonding potentialJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- Strength influencing variables on CAD/CAM zirconia frameworksDental Materials, 2008
- The Strength and Hydrothermal Stability of Y‐TZP Ceramics for Dental ApplicationsInternational Journal of Applied Ceramic Technology, 2007
- High quality mechanical etching of brittle materials by powder blastingSensors and Actuators A: Physical, 2000