Fluid management in roll-to-roll nanoimprint lithography
Authors:
- 21 June 2013
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 113 (23) , 234511
Abstract
The key process parameters of UV roll-to-roll nanoimprint lithography are identified from an analysis of the fluid, curing, and peeling dynamics. The process includes merging of droplets of imprint material, curing of the imprint material from a viscous liquid to elastic solid resist, and pattern replication and detachment of the resist from template. The time and distances on the web or rigid substrate over which these processes occur are determined as function of the physical properties of the uncured liquid, the cured solid, and the roller configuration. The upper convected Maxwell equation is used to model the viscoelastic liquid and to calculate the force on the substrate and the torque on the roller. The available exposure time is found to be the rate limiting parameter and it is , where R is the radius of the roller, ho is minimum gap between the roller and web, and uo is the velocity of the web. The residual layer thickness of the resist should be larger than the gap between the roller and the substrate to ensure complete feature filling and optimal pattern replication. For lower residual layer thickness, the droplets may not merge to form a continuous film for pattern transfer.
Keywords
This publication has 40 references indexed in Scilit:
- Control over pattern fidelity and surface wettability of imprinted templates for flexible color filter manufacturingMicroelectronic Engineering, 2011
- Roller nanoimprint lithography for flexible electronic devices of a sub-micron scaleMicroelectronic Engineering, 2011
- On non-Newtonian lubrication with the upper convected Maxwell modelApplied Mathematical Modelling, 2011
- Roll-to-roll fabricated lab-on-a-chip devicesJournal of Micromechanics and Microengineering, 2011
- Effects of exposure time on defects and demolding force in soft ultraviolet nanoimprint lithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2009
- Large-Area Roll-to-Roll and Roll-to-Plate Nanoimprint Lithography: A Step toward High-Throughput Application of Continuous NanoimprintingACS Nano, 2009
- High‐Speed Roll‐to‐Roll Nanoimprint Lithography on Flexible Plastic SubstratesAdvanced Materials, 2008
- Simple fabrication of nanostructure by continuous rigiflex imprintingMicroelectronic Engineering, 2007
- A contribution to the flow behaviour of thin polymer films during hot embossing lithographyMicroelectronic Engineering, 2001
- Non-Newtonian Lubrication With the Convected Maxwell ModelJournal of Tribology, 1996