Preliminary study of abrasive water jet texturing on low thickness UNS A92024 alloy sheets
Authors:
- F BañonF Bañon
- A SambrunoA Sambruno
- A GómezAGA Gómez
Open Access
- 1 October 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1193 (1) , 012027
Abstract
Texturing and surface modification operations are a line of research of great interest nowadays. The requirement to establish a process that can generate a constant and homogeneous roughness as a previous step to joining operations, application of paint or mechanical tests is a current challenge. Technologies such as shot blasting or laser texturing have achieved great results in terms of roughness and surface activation. Nevertheless, there is an alternative technology that is achieving great interest. Abrasive water jet texturing takes advantage of the combination of the impact of abrasive particles and water at high speed with the controlled displacement of the jet to generate a surface with a controlled roughness. Thus, in comparison with other technologies, abrasive waterjet texturing can achieve higher roughness values and a constant texturing area as a function of the overlap established between the passes. In this work, a preliminary study is proposed in order to establish a direct relationship between the parameters governing the technology and the roughness generated in a low thickness UNS A92024 alloy. Defectology associated to the process, as well as the combination of texturing parameters have been determined.Keywords
This publication has 16 references indexed in Scilit:
- Effects of Laser Microtexturing on the Wetting Behavior of Ti6Al4V AlloyCoatings, 2018
- Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys – A reviewComposites Part A: Applied Science and Manufacturing, 2017
- Surface properties and fatigue failure analysis of alloy 718 surfaces milled by abrasive and plain waterjetThe International Journal of Advanced Manufacturing Technology, 2017
- Adhesive behaviour of carbon fibre reinforced plastic panels manufactured using woven and unidirectional tape after ultraviolet laser surface treatmentJournal of Composite Materials, 2017
- Analysis of Alloy 718 surfaces milled by abrasive waterjet and post-processed by plain waterjet technologyProcedia Manufacturing, 2017
- The effect of sandblasting on surface properties for adhesionInternational Journal of Adhesion and Adhesives, 2016
- Abrasive Waterjet Texturing as a Method to Enhance the Embedment of Metallic Inserts in Composite MaterialsProcedia Engineering, 2015
- Effect of Sandblasting and Surface Mechanical Attrition Treatment on Surface Roughness, Wettability, and Microhardness Distribution of AISI 316LKey Engineering Materials, 2011
- The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4VWear, 2009
- Characteristics of the surface of a titanium alloy following milling with abrasive waterjetsWear, 2005