“In‐situ” monitoring of the non‐isothermal crystallization of polymers by dielectric spectroscopy
Authors:
- 1 June 2002
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 42 (6) , 1159-1170
Abstract
In recent years, experimental techniques based on microdielectrometry have attracted increasing interest for continuous monitoring, in a nondestructive way, of the advancement of the reaction of thermoset resins under cure. The extension of this technique for “ in ‐ situ ” monitoring of the crystallization of thermoplastics has been carried out. A correlation between the evolution of the dielectric parameters of the material and its viscoelastic properties was done. A dynamic rheometer equipped with a dielectric cell and an instrumented slit die was designed. The crystallization process is depicted by a conductivity drop and by the occurrence of a maximum in the real permittivity. The decrease of the specific conductivity results from a modification of the conductive paths, whereas the increase of the permittivity is due to an interfacial polarization phenomenon (so‐called Maxwell Wagner Sillars effect) between the amorphous phase and the growing crystalline entities. The sudden variation of the dielectric response is envisioned as a means for following the progression of the crystallization front within a mold. The description of the crystallization with Nakamura's model allowed the modeling of the crystallization inside a mold. The evolution of the temperature profile and of the crystallinity rate is modeled by a classical finite difference method. Dielectric measurements performed at controlled cooling rate experiments are in good agreement with the numerical simulation results and confirm the usefulness of dielectric measurements for “ In ‐ situ ” monitoring of the crystallization process of a polymer inside a mold.Keywords
This publication has 28 references indexed in Scilit:
- Dielectric Properties during Free-Radical Bulk Polymerization: Visible Light-Induced Polymerization of Bisphenol-A Bis(2-hydroxyethyl ether) DimethacrylateMacromolecules, 1997
- A Study of Reaction Kinetics by Near-Infrared Spectroscopy. 2. Comparison with Dielectric Spectroscopy of Model and Multifunctional Epoxy/Amine SystemsMacromolecules, 1995
- In situ sensor monitoring and intelligent control of the resin transfer molding processPolymer Composites, 1994
- Determination of glass transition temperature from viscosity and conductivity measurements for an epoxy–amine system during curingJournal of Applied Polymer Science, 1993
- Dielectric and viscoelastic studies of curing epoxy-amine model systemsPolymer Bulletin, 1993
- Real time dielectric investigations of phase separation and cure in rubber modified epoxy resin systemsEuropean Polymer Journal, 1992
- Relaxations in thermosets. IX. Ionic conductivity and gelation of DGEBA‐based thermosets cured with pure and mixed aminesJournal of Polymer Science Part B: Polymer Physics, 1991
- In‐situ monitoring of the resin transfer molding impregnation and cure processPolymer Engineering & Science, 1991
- Use of the frequency dependence of the impedance to monitor viscosity during curePolymer Engineering & Science, 1989
- Dielectric analysis of thermoset cure1986