Special-Length-Priority Algorithm to Minimize Reinforcing Bar-Cutting Waste for Sustainable Construction
Open Access
- 23 July 2020
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 12 (15) , 5950
Abstract
Reinforcing bars (rebar), which have the most embodied carbon dioxide (CO2) per unit weight in built environments, generate a significant amount of cutting waste during the construction phase. Excessive cutting waste not only increases the construction cost but also contributes to a significant amount of CO2 emissions. The objective of this paper is to propose a special-length-priority cutting waste minimization (CWM) algorithm for rebar, for sustainable construction. In the proposed algorithms, the minimization method by special and stock lengths was applied. The minimization by special length was performed first, and then the combination by stock length was performed for the remaining rebar. As a result of verifying the proposed algorithms through a case application, it was confirmed that the quantity of rebar was reduced by 6.04% compared with the actual quantity used. In the case building, a CO2 emissions reduction of 406.6 ton-CO2 and a cost savings of USD 119,306 were confirmed. When the results of this paper are applied in practice, they will be used as a tool for sustainable construction management as well as for construction cost reduction.Keywords
Funding Information
- National Research Foundation of Korea (2017R1D1A1B04033761)
This publication has 34 references indexed in Scilit:
- Solving an one-dimensional cutting stock problem by simulated annealing and tabu searchJournal of Industrial Engineering International, 2012
- The one-dimensional cutting stock problem with usable leftover – A heuristic approachEuropean Journal of Operational Research, 2009
- Heuristics for the one-dimensional cutting stock problem with limited multiple stock lengthsComputers & Operations Research, 2009
- A heuristic for the one-dimensional cutting stock problem with pattern reductionProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008
- Algorithms for Reducing the Waste Rate of Reinforcement BarsJournal of Asian Architecture and Building Engineering, 2004
- Using genetic algorithms in solving the one-dimensional cutting stock problem in the construction industryCanadian Journal of Civil Engineering, 2004
- A sequential heuristic procedure for one-dimensional cuttingEuropean Journal of Operational Research, 1999
- Random search in the one-dimensional cutting stock problemEuropean Journal of Operational Research, 1996
- A simulated annealing heuristic for the one-dimensional cutting stock problemEuropean Journal of Operational Research, 1996
- Cutting stock problems and solution proceduresEuropean Journal of Operational Research, 1991