Role of Phase Change Materials Containing Carbonized Rice husks on the Roof-Surface and Indoor Temperatures for Cool Roof System Application
Open Access
Abstract
This study researches the effect of phase change materials (PCMs) containing carbonized rice husks (CRHs) in wood plastic composites (WPCs) as roof finishing materials on roof-surface and indoor temperatures. A cool roof miniature model was prepared, and measurements were taken using three fixed temperatures of 30 to 32 °C, 35 to 37 °C, and 40 to 42 °C. Sodium sulfate decahydrate (Na2SO4·10H2O) and paraffin wax were selected as the PCMs. CRHs were used as additives to improve the thermal conductivities of the PCMs. At lower fixed temperatures such as 30 to 32 °C and 35 to 37 °C, the rates of increase of the surface temperatures of roofs containing CRHs with Na2SO4·10H2O, and paraffin wax, were observed to gradually decrease compared to those of the roofs without PCMs. The indoor temperatures for the above-mentioned PCMs containing CRHs were maintained to be lower than those of the indoors without PCMs. Additionally, as the CRH content in the PCM increased, the rates of increase of the roof-surface and indoor temperatures decreased due to a faster roof heat absorption by PCMs through the improved thermal conductivity of CRHs. However, under higher artificial temperatures such as 40 to 42 °C, Na2SO4·10H2O with CRHs exhibited no effect due to being out of latent heat range of Na2SO4·H2O. For paraffin wax, as CRH content increased, their roof- surface and indoor temperatures decreased. Especially, the surface temperature of the roof containing paraffin contained 5 wt.% CRHs reduced by 11 °C, and its indoor temperature dropped to 26.4 °C. The thermal conductivity of PCM was enhanced by the addition of CRHs. A suitable PCM selection in each location can result in the reduction of the roof-surface and indoor temperatures.Keywords
This publication has 36 references indexed in Scilit:
- Effect of indoor design temperature on the heating and cooling transmission loadsJournal of Building Engineering, 2016
- Thermal-energy analysis of roof cool clay tiles for application in historic buildings and citiesSustainable Cities and Society, 2015
- Role of building material in thermal comfort in tropical climates – A reviewJournal of Building Engineering, 2015
- Optimizing roof insulation for roofs with high albedo coating and radiant barriers in IndiaJournal of Building Engineering, 2015
- A review of the potential of attic ventilation by passive and active turbine ventilators in tropical MalaysiaSustainable Cities and Society, 2014
- On the development of an urban passive thermal comfort system in Cairo, EgyptBuilding and Environment, 2009
- Lowering the outdoor temperature in high-rise high-density residential developments of coastal Hong Kong: The vegetation influenceBuilding and Environment, 2008
- Urban design factors influencing heat island intensity in high-rise high-density environments of Hong KongBuilding and Environment, 2007
- Daytime urban heat island effect in high-rise and high-density residential developments in Hong KongEnergy and Buildings, 2004
- Roof orientation, roofing materials and roof surface colour: their influence on indoor thermal comfort in warm humid climatesEnergy for Sustainable Development, 2003