The influence of adding long basalt fiber on the mechanical and thermal properties of composites based on poly(oxymethylene)
- 30 October 2018
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 33 (4) , 435-450
Abstract
The work has evaluated the possibility of the potential reinforcing of poly(oxymethylene) (POM) by basalt fibers (BFs) and influence of BFs addition on thermal properties. Two types of composites were produced by injection molding. There were 20 and 40 wt% long BFs content with an average length of 1 mm. The samples were made without using a compatibilizer. In the experimental part, the basic mechanical properties (tensile strength, modulus of elasticity, strain at break, flexural modulus, flexural strength, and deflection at 3.5% strain) of composites based on POM were determined. Tensile properties were also evaluated at three temperatures −20°C, 20°C, and 80°C. The density and Charpy impact of the produced composites were also examined. The influence of water absorption on mechanical properties was investigated. Thermal properties were conducted by the differential scanning calorimetry, thermal gravimetric analysis, and fourier transform infrared (FTIR)-attenuation total reflection (ATR) spectroscopy analysis. In order to make reference to the effects of reinforcement and determine the structure characteristics, scanning electron microscopy images were taken. The addition of 20 and 40 wt% by weight of fibers increases the strength and the stiffness of such composites by more than 30–70% in the range scale of temperature. Manufactured composites show higher thermal and dimensional stability in relation to neat POM.Keywords
This publication has 18 references indexed in Scilit:
- Combined effects of fiber/matrix interface and water absorption on the tribological behaviors of water-lubricated polytetrafluoroethylene-based composites reinforced with carbon and basalt fibersComposites Part A: Applied Science and Manufacturing, 2014
- PVDF/PMMA/Basalt fiber composites: Morphology, melting and crystallization, structure, mechanical properties, and heat resistanceJournal of Applied Polymer Science, 2014
- Effect of functionalized nanosilica on properties of polyoxymethylene‐matrix nanocompositesPolymer Composites, 2013
- Chopped basalt fibres: A new perspective in reinforcing poly(lactic acid) to produce injection moulded engineering composites from renewable and natural resourcesExpress Polymer Letters, 2013
- Improvements in tribological properties of polyoxymethylene by aramid short fiber and polytetrafluoroethyleneIranian Polymer Journal, 2012
- The Mechanical and Tribological Properties of Carbon Fiber Reinforced POM CompositesApplied Mechanics and Materials, 2012
- Mechanical and thermal properties of basalt fiber reinforced poly(butylene succinate) compositesMaterials Chemistry and Physics, 2012
- Wear Behavior of Basalt Filled Low Density Polyethylene CompositesApplied Composite Materials, 2011
- Manufacturing and testing of long basalt fiber reinforced thermoplastic matrix compositesPolymer Engineering & Science, 2010
- Friction and wear properties of polyimide matrix composites reinforced with short basalt fibersJournal of Applied Polymer Science, 2008