An improved 40 Gb/s CDR with jitter-suppression filters and phase-compensating interpolators
Authors:
- 1 November 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 85-88
Abstract
An improved clock data recovery (CDR) operating at 40 Gb/s is implemented in 65 nm CMOS technology. Passive low-pass filters (LPFs) with adaptively adjusted bandwidth are introduced into the data-sampling path to automatically balance jitter tracking and jitter suppression for data decisions. Additionally, a time-averaging based compensating phase interpolator (PI) is proposed to not only improve the phase-step uniformity but also reduce phase-spacing drifting between edge and data sampling clocks. Measurement results show that different bandwidths for jitter transfer (4 MHz) and jitter tolerance (20 MHz) can be obtained. The total jitter of recovered clocks for edge-sampling and data-sampling are 11.48 ps and 7.66 ps, respectively. Meanwhile, the introduced jitter-suppression filters improve the maximum tolerable amplitude of sinusoidal jitter from 0.31 UI to 0.41 UI at 100 MHz.Keywords
This publication has 10 references indexed in Scilit:
- Design of 56 Gb/s NRZ and PAM4 SerDes Transceivers in CMOS TechnologiesIEEE Journal of Solid-State Circuits, 2015
- A 40 Gb/s Serial Link Transceiver in 28 nm CMOS TechnologyIEEE Journal of Solid-State Circuits, 2014
- 4×25 Gb/s Transceiver With Optical Front-end for 100 GbE System in 65 nm CMOS TechnologyIEEE Journal of Solid-State Circuits, 2014
- A 780 mW 4 $\times$ 28 Gb/s Transceiver for 100 GbE Gearbox PHY in 40 nm CMOSIEEE Journal of Solid-State Circuits, 2014
- A 4–32 Gb/s Bidirectional Link With 3-Tap FFE/6-Tap DFE and Collaborative CDR in 22 nm CMOSIEEE Journal of Solid-State Circuits, 2014
- 8.7 A 4-to-10.5Gb/s 2.2mW/Gb/s continuous-rate digital CDR with automatic frequency acquisition in 65nm CMOS2014
- A Sub-2 W 39.8–44.6 Gb/s Transmitter and Receiver Chipset With SFI-5.2 Interface in 40 nm CMOSIEEE Journal of Solid-State Circuits, 2013
- A Multichannel Serial Link Receiver With Dual-Loop Clock-and-Data Recovery and Channel EqualizationIEEE Transactions on Circuits and Systems I: Regular Papers, 2013
- A 4.5 mW/Gb/s 6.4 Gb/s 22+1-Lane Source Synchronous Receiver Core With Optional Cleanup PLL in 65 nm CMOSIEEE Journal of Solid-State Circuits, 2010
- Clocking Analysis, Implementation and Measurement Techniques for High-Speed Data Links—A TutorialIEEE Transactions on Circuits and Systems I: Regular Papers, 2009