Electrospun nanofiber polyacrylonitrile coated separators to suppress the shuttle effect for long‐life lithium–sulfur battery
- 14 October 2019
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (17)
Abstract
Polymeric coating on the separator with effective polysulfides diffusion inhibition can provide intimate contact between intermediate polysulfides and conductive layer of separator for high‐energy lithium–sulfur (Li–S) batteries. Herein, polyacrylonitrile–poly(1,5‐diaminoanthraquinone) (PAN/PDAAQ) and PAN‐potassium functionalized graphene (PAN/K‐FGF) nanofibers are synthesized via electrospinning method and act as effective separators for Li–S batteries to minimize polysulfides diffusion toward the anode. PAN/K‐FGF coated separator shows capacity retention of 768 mAh g−1 after 100 cycles at 1C. The capacity maintains at 419 mAh g−1 after 500 cycles. PAN/PDAAQ nanofibers are coated on glass fiber separator functions as physical and chemical barrier for polysulfides diffusion. Therefore, the cell with PAN/PDAAQ coating on the separator demonstrates capacity retention of 881 mAh g−1 after 100 cycles at 1C and small capacity decay rate of 0.11% per cycle resulted in 800 cycles at 1C. PAN/PDAAQ could define as an ideal separator material for Li–S batteries. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48606.Keywords
Funding Information
- Istanbul Teknik Üniversitesi
This publication has 47 references indexed in Scilit:
- Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li–S batteriesEnergy & Environmental Science, 2012
- Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer CoatingACS Nano, 2011
- Graphene-Wrapped Sulfur Particles as a Rechargeable Lithium–Sulfur Battery Cathode Material with High Capacity and Cycling StabilityNano Letters, 2011
- Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur BatteriesAngewandte Chemie International Edition, 2011
- CNT enhanced sulfur composite cathode material for high rate lithium batteryElectrochemistry Communications, 2011
- A novel pyrolyzed polyacrylonitrile-sulfur@MWCNT composite cathode material for high-rate rechargeable lithium/sulfur batteriesJournal of Materials Chemistry, 2011
- Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium BatteryChemistry of Materials, 2009
- Graphene-based composite materialsNature, 2006
- Sulfur Composite Cathode Materials for Rechargeable Lithium BatteriesAdvanced Functional Materials, 2003
- Preparation and characterization of porous polyacrylonitrile membranes for lithium-ion polymer batteriesJournal of Power Sources, 2003