Hydrothermal synthesis of mesoporous materials from diatomaceous earth
Authors:
- 28 June 2007
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 53 (8) , 2114-2122
Abstract
Hydrothermal synthesis of mesoporous materials from diatomaceous earth has been carried out under saturated steam pressure (0.2–1.56 MPa) at 393–473 K for up to 72 h by slaked lime introduction. During the hydrothermal synthesis process, calcium silicate hydrate (CSH) was among the first phase formed and invariably appeared before tobermorite. The CSH formation seemed to exert a positive effect on the strength development and pore size evolution initially; whilst the tobermorite formation appeared to further enhance the strength and narrow the pore size. With curing at 473 K for 18 h, both of the strength and pore size distribution tended to reach optimal at which the pore size distribution also ranges between mesoporous area (2–50 nm in diameter). The highest strength seemed to coincide with the finest pore size distribution of the synthesized porous material during hydrothermal processing in this study. © 2007 American Institute of Chemical Engineers AIChE J, 2007Keywords
This publication has 21 references indexed in Scilit:
- Municipal incineration bottom ash treatment using hydrothermal solidificationWaste Management, 2007
- Novel mesoporous chromium oxide for VOCs eliminationApplied Catalysis B: Environment and Energy, 2007
- Activation of fly ash cementitious systems in the presence of quicklime. Part II: Nature of hydration products, porosity and microstructure developmentCement and Concrete Research, 2006
- Influence of Quartz Particle Size on Hydrothermal Solidification of Blast Furnace SlagIndustrial & Engineering Chemistry Research, 2006
- Simple and rapid synthesis of mesoporous silica by vacuum solvent evaporationAIChE Journal, 2005
- Study on a New Humidity Controlling Material Porous Soil "Allophane"-Design of Humidity Controlling Material-Resources Processing, 2005
- Soil‐Ceramics (Earth), Self‐adjustment of Humidity and Temperature2002
- A Coupled Airflow and Source/Sink Model for Simulating Indoor VOC ExposuresIndoor Air, 2001
- Analytical study of the variation of physico-chemical and structural properties of a Kieselgühr during its decarbonationAnalusis, 1998
- Synthesis and characterization of mesoporous niobium-doped silica molecular sievesAIChE Journal, 1997