Effect of Mn Content on the Microstructure and Electrochemical Performance of LiNi[sub 0.75−x]Co[sub 0.25]Mn[sub x]O[sub 2] Cathode Materials
Authors:
- 1 January 2005
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 152 (9) , A1695-A1700
Abstract
Newly developed LiNi0.75−xCo0.25MnxO2LiNi0.75−xCo0.25MnxO2 (0.1⩽x⩽0.25)(0.1⩽x⩽0.25) cathode materials were successfully synthesized by mixing Ni0.75−xCo0.25MnxNi0.75−xCo0.25Mnx (OH)2(OH)2 and Li2CO3Li2CO3 via the solid-state reaction followed by heating to elevated temperatures. X-ray diffraction patterns showed that the samples calcined at 900°C900°C exhibited a typical hexagonal α-NaFeO2α-NaFeO2 structure without any other impurities present. The ratio of peak intensities of (003) to (104) decreased with the increasing Mn content. The scanning electron microscopy micrograph revealed uniform primary particle size, and the small primary particles agglomerated to form the secondary ones with size distribution in the range of 6-9μm6-9μm . The X-ray photoelectron spectroscopy measurement indicated that the valence of Ni ions was a mixture of 2+2+ and 3+3+ . The amount of Mn substituted for Ni increased proportional to the ratio of Ni2+∕Ni3+Ni2+∕Ni3+ in the samples was increased. Besides, for dynamic equilibrium (Ni2++Mn4+↔Ni3++Mn3+)(Ni2++Mn4+↔Ni3++Mn3+) , small amount Mn4+Mn4+ was reduced to Mn3+Mn3+ . After cycling, the cathode materials showed good electrochemical performance, with initial discharge capacity around 170mAh∕g170mAh∕g at 0.1C0.1C rate in the voltage range of 3-4.3V3-4.3V . At a high rate of 1C1C , 85% efficiency was still attainable in all samples.Keywords
This publication has 36 references indexed in Scilit:
- Layered LixMn1 − yNiyO2 intercalation electrodesJournal of Materials Chemistry, 2000
- Preparation and properties of LiCo Mn Ni1−−O2 as a cathode for lithium ion batteriesJournal of Power Sources, 2000
- LiNi0.74Co0.26-xMgxO2 Cathode Material for a Li-Ion CellChemistry of Materials, 2000
- An overview of the Li(Ni,M)O2 systems: syntheses, structures and propertiesElectrochimica Acta, 1999
- Lithium insertion into host materials: the key to success for Li ion batteriesElectrochimica Acta, 1999
- Effects of CO2 in air on Li deintercalation from LiNi1−x−yCoxAlyO2Journal of Power Sources, 1999
- Synthesis and electrochemical characterization of LiMO2 (M=Ni, Ni0.75Co0.25) for rechargeable lithium ion batteriesSolid State Ionics, 1998
- Chimie douce with solid precursors, past and presentSolid State Ionics, 1996
- Cation distribution and chemical deintercalation of Li1-xNi1+xO2Materials Research Bulletin, 1990
- LixCoO2 (0<x<-1): A new cathode material for batteries of high energy densityMaterials Research Bulletin, 1980