Radiated Susceptibility on the Printed-Circuit-Board Level: Simulation and Measurement
Author:
- 10 October 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 47 (3) , 471-478
Abstract
The electromagnetic field coupling into the traces on a printed circuit board (PCB) is investigated. Based on a simplified equivalent-wire model, a practical simulation method is presented, which enables an efficient treatment by the method of moment, with minimum computational and modeling effort. Validation by analytic and measurement results shows an acceptable accuracy within the limits of quasi-TEM propagation. The gigahertz transverse electromagnetic cell is found to be a suitable means for measuring the field coupling into PCBs. To reduce additional common-mode coupling, special care has to be taken for the length of the measurement cable connected to the PCB within the cell.Keywords
This publication has 5 references indexed in Scilit:
- Fast Susceptibility Analysis for Printed Circuit Boards Using an Equivalent-Wire Method of Moments1999
- On the coupling of an external electromagnetic field to a printed circuit board traceIEEE Transactions on Electromagnetic Compatibility, 1999
- Fast EMC Analysis for Printed Circuit Boards using an Equivalent-Wire Method of Moments1998
- Field Computation by Moment Methods1993
- Response of a planar microstrip line excited by an external electromagnetic fieldIEEE Transactions on Electromagnetic Compatibility, 1990