Impacts of Cooling Reduction Due to Spray Nozzle Clogging on Shell Formation in Continuous Casting of Steel
Open Access
Abstract
In steel continuous casting, the secondary cooling zone is usually equipped with air-mist nozzles. Spray nozzle clogging is a common problem that reduces cooling efficiency and affects product quality. This study uses a 3D CFD model to investigate its impact on heat transfer. The model includes the full-size caster geometry and actual nozzle layout to analyze the effect of clogging on the cooling process. The solidification process is modeled using the enthalpy-porosity method. Spray cooling is defined through empirical HTC correlations on the slab surface. The study focuses on how nozzle clogging changes the surface temperature, cooling rate, and metallurgical length (ML). Simulation results show that clogging raises the local surface temperature by about 100 K and increases the ML. More clogged nozzles lead to a longer ML. Clogging near the meniscus has a stronger impact, showing that early-stage cooling plays an important role in solidification. Even a single clogged nozzle can increase the ML by 3.2%, highlighting the significant effect of nozzle clogging on the casting process.Keywords
This publication has 19 references indexed in Scilit:
- Numerical study on the effect of different spray characteristics of casting nozzles on W-shape solidification and segregation during continuous casting of slabsInternational Journal of Heat and Mass Transfer, 2023
- Decreasing Porosities in Continuous Casting Thick Slab by Soft Reduction TechnologyMetallurgical and Materials Transactions B, 2021
- Uniform Secondary Cooling Pattern for Minimizing Surface Reheating of the Strand During Round Bloom Continuous CastingJOM, 2017
- Local and averaged-area analysis of steel slab heat transfer and phase change in continuous casting processApplied Thermal Engineering, 2017
- Optimization of Nozzle Layout in Continuous Casting MachineBulletin of the South Ural State University. Series "Mathematical Modelling, Programming and Computer Software", 2016
- The Influence of Support Rollers of Continuous Casting Machines on Heat Transfer and on Stress‐Strain of Slabs in Secondary CoolingSteel Research International, 2010
- 3D steady state and transient simulation tools for heat transfer and solidification in continuous castingMaterials Science and Engineering: A, 2005
- Optimization of Continuous Casting Using SimulationMaterials and Manufacturing Processes, 2005
- Heat-transfer and solidification model of continuous slab casting: CON1DMetallurgical and Materials Transactions B, 2003
- Fluid flow through granular bedsChemical Engineering Research and Design, 1997