High-speed laser cladding of high-entropy ultra-high temperature ceramic coating materials
Authors:
- Qiyao DengQDQiyao Deng
- Pengfei HePHPengfei He
- Shu Jun HuSHShu Jun Hu
- Hong MengHMHong Meng
- Chuan SunCSChuan Sun
- Kaiju LuKLKaiju Lu
- Youjiang ZhangYZYoujiang Zhang
- Fengchun JiangFJFengchun Jiang
- Xiubing LiangXLXiubing Liang
Preprint
- 5 June 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
High-entropy ultra-high temperature ceramics (HE-UHTCs) are a class of emerging functional materials for extreme environments. However, their current synthesis processes are rather complex, requiring extremely high energy input and prolonged time. This study innovatively proposes a new method for directly fabricating HE-UHTCs using high-speed laser cladding technology. By leveraging the extremely high energy density and adjustable energy distribution of the laser, the synthesis of a single-phase high-entropy carbide ceramic (HfTaZrTiNb)C from five refractory metal carbide components (HfC, TaC, ZrC, TiC, and NbC) was successfully achieved. Concurrently, a Ta-rich metal solid solution phase formed in the coating, which effectively improved its toughness. The fabricated coating exhibits a dense microstructure, minimal internal defects, and a well-formed metallurgical interface with the refractory alloy substrate (Ta10W). From the bottom to the top of the coating, the microstructure evolves sequentially from planar grains to columnar grains, then cellular grains, and ultimately to equiaxed grains. Besides, the functionally graded coating with a hard exterior (2050.54 ± 433.68 HV0.5) and a tough interior (3.36 ± 0.56 MPa·m1/2) exhibits strong mechanical resistance. Notably, the coating exhibits regionally differentiated fracture toughness mechanisms. This is primarily attributed to the gradient increase in the content of the Ta-rich metal solid solution phase from the top of the coating towards the substrate. This gradient distribution is a key factor driving the evolution of toughening mechanisms in different regions of the coating.Keywords
This publication has 38 references indexed in Scilit:
- Research on in situ generation mechanism and tribological properties of superhard high entropy ceramic coatings by high speed laser claddingCeramics International, 2025
- Synthesis, microstructure, mechanical and tribological properties of high-entropy carbides (WZrNbTaTi)C-SiCwCeramics International, 2024
- Microstructure development of plasma sprayed dual-phase high entropy ceramic coating derived from spray dried and induction plasma spheroidized powderCeramics International, 2024
- Synthesis of a new class of high-entropy nitride ceramics and the effects of nitrogen vacancies on their magnetic propertiesApplied Surface Science, 2023
- Mechanical properties and deformation mechanisms of (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C high‐entropy ceramics characterized by nanoindentation and scratch testsCeramics International, 2022
- Synthesis and characterization of (HfMoTiWZr)C high entropy carbide ceramicsCeramics International, 2022
- The directional array TiN-reinforced AlCoCrFeNiTi high-entropy alloy synthesized in situ via magnetic field-assisted laser claddingApplied Surface Science, 2022
- High-entropy ceramics: Present status, challenges, and a look forwardJournal of Advanced Ceramics, 2021
- EHLA: Extreme High‐Speed Laser Material DepositionPhotonicsViews, 2017
- Alternative with a FuturePhotonicsViews, 2017