Performance enhancement of flexible CZTSSe solar cells on optimized roughness substrate
Authors:
- 10 July 2018
- journal article
- research article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 57 (07) , 077101-8
Abstract
Flexible Cu2ZnSn(S,Se)4 (CZTSSe) thin film solar cells are fabricated on titanium substrate by magnetron sputtering with a composition gradient precursor followed by selenization. By varying polishing time with diluted HNO3 and HF from 0 to 90 s, an atomic force microscope shows that the substrate with the minimal surface roughness of 8.6 nm is obtained with the polishing time of 60 s. X-ray diffraction and Raman spectroscopy reveal a highly crystalline structure for the prepared CZTSSe thin films. The gradual grown up grain size of CZTSSe thin film is observed with the increasing polishing time of the substrate. Compared with the CZTSSe solar cells on untreated titanium substrates, a maximum power conversion efficiency enhancement of 56% is achieved for solar cells on polished substrates, which can be attributed to the reduction of recombination at the interface and isolated defects in devices. External quantum efficiency curves show an enhancement in the visible and near-infrared region after optimizing substrate roughness. On the basis of Ti substrate with a minimum roughness, the percentage reduction of efficiency is found to exhibit the minimum value of 5% after bending for five times.Keywords
Funding Information
- Jiangsu Higher Education Institutions
- National Natural Science Foundation of China (61774084)
- Jiangsu Province for the transformation of scientific and technological achievements (BA2015121)
- Joint Frontier Research Project of Jiangsu Province (BY2016003-09)
- Jiangsu Province Cultivation base for State Key Laboratory of Photovoltaic Science and Technology (SKLPSTKF201506)
This publication has 29 references indexed in Scilit:
- Reactive sputtering of precursors for Cu2ZnSnS4 thin film solar cellsThin Solid Films, 2012
- Single-step preparation and characterization of Cu2ZnSn(SxSe1−x)4 thin films deposited by pulsed laser deposition methodJournal of Alloys and Compounds, 2012
- Deposition of Cu2ZnSnS4 thin films by vacuum thermal evaporation from single quaternary compound sourceMaterials Letters, 2012
- Development of CZTS thin films solar cells by pulsed laser deposition: Influence of pulse repetition rateSolar Energy, 2011
- Comparative study of Cu2ZnSnS4 film growthSolar Energy Materials and Solar Cells, 2011
- In situ growth of Cu2ZnSnS4 thin films by reactive magnetron co-sputteringSolar Energy Materials and Solar Cells, 2010
- Preparation of Cu2ZnSnS4 thin films by sulfurization of stacked metallic layersThin Solid Films, 2008
- Towards sustainable materials for solar energy conversion: Preparation and photoelectrochemical characterization of Cu2ZnSnS4Electrochemistry Communications, 2008
- Cu2ZnSnS4-type thin film solar cells using abundant materialsThin Solid Films, 2007
- Impact of substrate roughness on CuInxGa1−xSe2 device propertiesSolar Energy Materials and Solar Cells, 2004