Characteristics of Diamond Abrasive Used in Magnetic Abrasive Finishing of Nickel-Based Superalloys
- 1 September 2020
- journal article
- research article
- Published by ASME International in Journal of Micro and Nano-Manufacturing
- Vol. 8 (3)
Abstract
Nickel-based superalloys have a wide range of high-temperature applications such as turbine blades. The complex geometries of these applications and the specific properties of the materials raise difficulties in the surface finishing. Magnetic abrasive finishing (MAF) has proven effective in finishing the complex geometries. In MAF, the magnetic properties of the workpiece, tool, and abrasive play important roles in controlling finishing characteristics. This paper presents the effects of nickel coating on the abrasive behavior during finishing and resulting finishing characteristics of Ni-based superalloys. The Ni-coated diamond abrasive is more attracted to the magnet than the Ni-based superalloy surface. As a result, fewer Ni-coated diamond abrasive particles, which are stuck between the magnetic-particle brush and the target surface, participate in surface finishing. Because of this, coupled with the reduced sharpness of abrasive cutting edges due to the coating, Ni-coated diamond abrasive cannot effectively smooth the target surface in MAF. However, the Ni coating is worn off during finishing of the hard, rough, additively manufactured surface. Then, the diamond abrasive participates in finishing as uncoated diamond abrasive and facilitates the material removal, finishing the target surface.Keywords
This publication has 16 references indexed in Scilit:
- Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishingJournal of Materials Processing Technology, 2018
- Adsorption and deposition of micro diamond particles in preparing diamond magnetic abrasives by electroless composite platingDiamond and Related Materials, 2017
- Modification using magnetic field-assisted finishing of the surface roughness and residual stress of additively manufactured componentsCIRP Annals, 2017
- Review on powder-bed laser additive manufacturing of Inconel 718 partsProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016
- Nanofinishing of freeform surfaces (knee joint implant) by rotational-magnetorheological abrasive flow finishing (R-MRAFF) processPrecision Engineering, 2015
- Application of Magnetic Polishing With Ball Nose Shaped Tool for Microchannel ShapeJournal of Micro and Nano-Manufacturing, 2014
- Surface finishing of cobalt chromium alloy femoral knee componentsCIRP Annals, 2014
- Tool wear characteristics in machining of nickel-based superalloysInternational Journal of Machine Tools and Manufacture, 2013
- A comparative study: polishing characteristics and its mechanisms of three vibration modes in vibration-assisted magnetic abrasive polishingInternational Journal of Machine Tools and Manufacture, 2004
- Influence of precipitate morphology on intermediate temperature creep properties of a nickel-base superalloy single crystalMetallurgical Transactions A, 1989