Dissimilar 2·25Cr/9Cr and 2Cr/0·5CrMoV steel welds: Part 2: Identification of precipitates
Authors:
- E. KozeschnikEKE. Kozeschnik
- P. WarbichlerPWP. Warbichler
- I. Letofsky-PapstILI. Letofsky-Papst
- S. BrettSBS. Brett
- B. BuchmayrBBB. Buchmayr
- 1 April 2002
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 7 (2) , 69-76
Abstract
The long range diffusion of rapidly diffusing elements in dissimilar welds, which occurs during heat treatment and in service exposure, initiates heavy microstructural changes on both sides of the weld. Various carbides and nitrides either dissolve or precipitate as a function of the distance from the fusion line. The type and amount of these particles can be predicted by a numerical method for solving problems of simultaneous precipitation and diffusion. Predicted precipitate distributions for a 2·25Cr/9Cr and a 2Cr/0·5CrMoV weld are verified using experimental data obtained with analytical and energy filtering transmission electron microscopy. The phase diagrams for the high chromium side and the low chromium side of the welds are evaluated and compared with the experimentally determined precipitate distribution.Keywords
This publication has 6 references indexed in Scilit:
- Dissimilar 2·25Cr/9Cr and 2Cr/0·5CrMoV steel welds: Part 1: Characterisation of weld zone and numerical simulationScience and Technology of Welding and Joining, 2002
- On the application of energy-filtering TEM in materials science: III. Precipitates in steelMicron, 1998
- On the detection of MX‐precipitates in microalloyed steels using energy‐filtering TEMJournal of Microscopy, 1996
- Imaging of nanometer-sized precipitates in solids by electron spectroscopic imagingUltramicroscopy, 1995
- Computer simulation of diffusion in multiphase systemsMetallurgical and Materials Transactions A, 1994
- Computer simulation of multicomponent diffusional transformations in steel1990