Three-dimensional (3D) evaluation of liquid distribution in shake flask using an optical fluorescence technique
Open Access
- 3 August 2017
- journal article
- research article
- Published by Springer Nature in Journal of Biological Engineering
- Vol. 11 (1) , 1-9
Abstract
Biotechnological development in shake flask necessitates vital engineering parameters e.g. volumetric power input, mixing time, gas liquid mass transfer coefficient, hydromechanical stress and effective shear rate. Determination and optimization of these parameters through experiments are labor-intensive and time-consuming. Computational Fluid Dynamics (CFD) provides the ability to predict and validate these parameters in bioprocess engineering. This work provides ample experimental data which are easily accessible for future validations to represent the hydrodynamics of the fluid flow in the shake flask. A non-invasive measuring technique using an optical fluorescence method was developed for shake flasks containing a fluorescent solution with a waterlike viscosity at varying filling volume (VL = 15 to 40 mL) and shaking frequency (n = 150 to 450 rpm) at a constant shaking diameter (do = 25 mm). The method detected the leading edge (LB) and tail of the rotating bulk liquid (TB) relative to the direction of the centrifugal acceleration at varying circumferential heights from the base of the shake flask. The determined LB and TB points were translated into three-dimensional (3D) circumferential liquid distribution plots. The maximum liquid height (Hmax) of the bulk liquid increased with increasing filling volume and shaking frequency of the shaking flask, as expected. The toroidal shapes of LB and TB are clearly asymmetrical and the measured TB differed by the elongation of the liquid particularly towards the torus part of the shake flask. The 3D liquid distribution data collected at varying filling volume and shaking frequency, comprising of LB and TB values relative to the direction of the centrifugal acceleration are essential for validating future numerical solutions using CFD to predict vital engineering parameters in shake flask.Keywords
Funding Information
- RWTH Aachen University
This publication has 35 references indexed in Scilit:
- CFD analysis of the turbulent flow in baffled shake flasksBiochemical Engineering Journal, 2013
- Numerical simulation of orbitally shaken viscous fluids with free surfaceInternational Journal for Numerical Methods in Fluids, 2012
- Hydrodynamic stress in orbitally shaken bioreactorsBMC Proceedings, 2011
- CFD simulation of stirred tanks: Comparison of turbulence models (Part II: Axial flow impellers, multiple impellers and multiphase dispersions)The Canadian Journal of Chemical Engineering, 2011
- Hydromechanical stress in shake flasks: Correlation for the maximum local energy dissipation rateBiotechnology and Bioengineering, 2006
- Characterisation of the gas–liquid mass transfer in shaking bioreactorsBiochemical Engineering Journal, 2001
- Power consumption in shaking flasks on rotary shaking machines: II. Nondimensional description of specific power consumption and flow regimes in unbaffled flasks at elevated liquid viscosityBiotechnology and Bioengineering, 2000
- Hot-film anemometry in liquid flowsMeasurement Science and Technology, 1996
- Study of hydrodynamics in microcarrier culture spinner vessels: A particle tracking velocimetry approachBiotechnology and Bioengineering, 1996
- Study of hydrodynamics in microcarrier culture spinner vessels: A particle tracking velocimetry approachBiotechnology and Bioengineering, 1996