Pressure Behavior Analysis of Permeability Changes Due to Sand Production in Offshore Loose Sandstone Reservoirs Using Boundary-Element Method
Open Access
Abstract
In recent years, sand production has been frequently observed in offshore weakly consolidated sandstone reservoirs. Permeability changes due to sand migration seriously affect the confidence in well test interpretation, production forecasts, and oilfield development plan schedules. The purpose of this paper is to propose a comprehensive model of coupled sand migration, stress sensitivity, and high viscosity oil and to study the effect of sand production induced permeability zoning on transient pressure behavior by combining discrete boundary and discrete wellbore with the boundary element method. In this two-zone composite model, the reservoir can be divided into the inner zone with the improved permeability due to sand migration and the outer zone with initial reservoir permeability. The multifactor effects of stress-sensitive, highly viscous oil, sand migration, and horizontal well are included in this model. Thus, the seepage equation presents a highly nonlinear and difficult to obtain an accurate analytical solution. In this paper, the boundary element method (BEM) is introduced to separate the boundary and wellbore, and the semianalytical solution of the hybrid model is obtained. The comparative analysis of measured pressure curve fitting from a horizontal well, located in the eastern of the South China Sea, proves that this comprehensive model can be used for pressure transient analysis of the weakly consolidated sandstone reservoir. The flow regime analysis indicates that a two-zone composite system may develop seven flow regimes: the wellbore storage stage, early-time radial stage, first transition stage, inner linear stage, inner pseudoradial flow, transition flow from the inner area to the outer area, and outer pseudoradial flow. Sensitivity analysis indicates that the smaller the sand production radius, the shorter the duration of the transition flow from the inner to the outer zone, which suggests the well is mainly affected by the outer boundary in the later period. The larger the permeability ratio, the higher the pressure curves may move up.Keywords
Funding Information
- National Natural Science Foundation of China (51774297, U1762210)
- Research Program of Productivity evaluation of loose sandstone heavy oil reservoir from CNOOC China Limited, Shenzhen Branch, Shenzhen, China (51774297, U1762210)
This publication has 29 references indexed in Scilit:
- The Numerical Simulation of non-Darcy Flow for YuShulin Low Permeability OilfieldInternational Journal of Control and Automation, 2013
- Effective parameters for sand production in unconsolidated formations: An experimental studyJournal of Petroleum Science and Engineering, 2013
- Development of New Type Curves for Production Analysis in Naturally Fractured Shale Gas/Tight Gas Reservoirs2013
- An Improved Streamline-Generating Technique That Uses the Boundary (Integral) Element MethodSPE Reservoir Engineering, 1988
- Nonsteady flow through porous media in the presence of a threshold gradientActa Mechanica, 1981
- Unsteady flow in confined aquifers: A comparison of two boundary integral methodsWater Resources Research, 1979
- Factors Influencing the Deterioration of s Plastic Sand Consolidation TreatmentsJournal of Petroleum Technology, 1974
- Review of Sand Consolidation Experience in South LouisianaJournal of Petroleum Technology, 1966
- The Skin Effect and Its Influence on the Productive Capacity of a WellJournal of Petroleum Technology, 1953
- The Application of the Laplace Transformation to Flow Problems in ReservoirsJournal of Petroleum Technology, 1949