Testing of Surface Mounted Superconducting Stacks as Trapped-Flux Magnets in a Synchronous Machine
- 27 February 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (5) , 1-8
Abstract
Stacks of high temperature superconducting tapes may offer a technically affordable solution for the application of superconducting materials as trapped-flux magnets in the rotor of synchronous electrical machines. Nevertheless, several concerns must be first addressed, among others, the optimal procedure to induce the current vortexes previously to operation (magnetization), the survivability of these vortexes in the electromagnetic environment present in an electrical machine and the accuracy of recently developed numerical models. With the aim of exploring such practicalities, this paper presents a modified synchronous machine to test under liquid nitrogen conditions thin stacks of superconducting tapes. The machine is run under realistic conditions: currents in the stacks are induced from the stator, then the shaft is rotated and finally the machine is connected to a load, working as a generator. The results confirm previous numerical and experimental studies and establish a procedure for assessing the behavior of stacks in their actual operational environment.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/P000738/1)
- H2020 Energy (723119)
This publication has 21 references indexed in Scilit:
- High power density superconducting rotating machines—development status and technology roadmapSuperconductor Science and Technology, 2017
- Demagnetisation by crossed fields in superconductorsSuperconductor Science and Technology, 2017
- A New Software Tool for Design, Optimization, and Complete Analysis of Rotating Electrical Machines WindingsIEEE Transactions on Magnetics, 2015
- Pulsed-Field Magnetization of Superconducting Tape Stacks for Motor ApplicationsIEEE Transactions on Applied Superconductivity, 2015
- Investigation of Demagnetization in HTS Stacked Tapes Implemented in Electric Machines as a Result of Crossed Magnetic FieldIEEE Transactions on Applied Superconductivity, 2014
- Trapped Field Profiles for 40-mm Wide Superconducting Tape PiecesJournal of Superconductivity and Novel Magnetism, 2014
- Trapped fields greater than 7 T in a 12 mm square stack of commercial high-temperature superconducting tapeApplied Physics Letters, 2013
- Stator Design for a 1000 kW HTSC Motor With Air-gap WindingIEEE Transactions on Applied Superconductivity, 2011
- Magnetic properties of Ni-based substrates for HTS tapeSuperconductor Science and Technology, 2008
- Numerical solution of critical state in superconductivity by finite element softwareSuperconductor Science and Technology, 2006