Robotic manufacturing by shaped metal deposition: state of the art
Authors:
- 18 October 2011
- journal article
- research article
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 38 (6) , 622-628
Abstract
Purpose: The purpose of this paper is to provide an overview of shaped metal deposition (SMD). SMD is an additive manufacturing process which uses a robotic cell to create fully dense, near‐net shape, metallic parts directly from computer‐aided design files.Design/methodology/approach: Research into optimising the SMD process was carried out as part of the 6th Framework RAPOLAC project. This included developing both robotic and weld models, creating a weld controller, and using a design of experiments approach to optimise parameters based on the resultant component microstructure and material properties. Extensive metallurgical analysis and mechanical testing was carried out.Findings: A mechatronic model of the robot was produced and integrated with a novel controller to allow parts to be manufactured with little or no operator intervention. Computational models of the temperature field, microstructure, strain and stresses that occur during deposition were also developed. Variation in weld parameters was linked to part microstructure and mechanical properties.Research limitations/implications: This research focussed on a common titanium aerospace alloy (Ti‐6Al‐4V).Practical implications: The SMD process is applicable to a variety of parts in a range of industrial sectors. It is cost‐effective for low‐volume parts and prototypes, but it is envisaged that its main use will be to add material to previously forged or cast components and therefore SMD will allow companies to reduce both the size of forgings and material waste. SMD as a repair technique is also being investigated.Originality/value: The paper provides a summary of the latest advances in robotic manufacturing by SMD.Keywords
This publication has 11 references indexed in Scilit:
- Finite element modeling of welding processesApplied Mathematical Modelling, 2011
- Computational modelling of shaped metal depositionInternational Journal for Numerical Methods in Engineering, 2010
- Texture and Crystal Orientation in Ti-6Al-4V Builds Fabricated by Shaped Metal DepositionMetallurgical and Materials Transactions A, 2010
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical propertiesMaterials & Design (1980-2015), 2010
- Additive manufactured Ti-6Al-4V using welding wire: comparison of laser and arc beam deposition and evaluation with respect to aerospace material specificationsPhysics Procedia, 2010
- Microstructure of Ti-6Al-4V specimens produced by shaped metal depositionInternational Journal of Materials Research, 2009
- A modular software interface for the control system of an arc welding robot2009
- Mechanical properties of Ti-6Al-4V specimens produced by shaped metal depositionScience and Technology of Advanced Materials, 2009
- Microstructure and Mechanical Properties of Stainless Steel Component Manufactured by Shaped Metal DepositionISIJ International, 2009
- A closed loop welding controller for a rapid manufacturing process2008