Asymmetry in interface and bending property of Al/Cu/Al bimetallic laminates
- 2 August 2014
- journal article
- Published by Wiley in Rare Metals
- Vol. 33 (5) , 556-562
Abstract
This work was aimed to study the interfacial microstructures and three‐point bending properties of Al/Cu/Al bimetallic laminates produced by the asymmetrical roll bonding and annealing. It is found that the microstructure and bonding strength of the Al/Cu interface are different with those of the Cu/Al interface. The interfacial microstructure of Cu/Al interface is improved due to the large interfacial plastic deformation caused by the different rotation speeds of roll in the asymmetrical roll bonding process. The bonding strength between Al and Cu layer can be enhanced by the moderate atomic diffusion, but is dramatically depressed by the formation of intermetallic compounds in the interface. The bending strength of bimetallic laminates is enhanced when the Cu/Al interface is loaded in tension because of the improvement of stress transition and damping by the Cu/Al interface during the three‐point bending deformation. The bending fracture reveals that the interfacial cracks can be inhibited from the restricted stress concentration in the improved Cu/Al interface.Keywords
Funding Information
- National Natural Science Foundation of China (50971038)
- National Natural Science Foundation of China (51174058)
This publication has 26 references indexed in Scilit:
- Interfacial reaction process of the hot‐pressed WC/2024Al compositeRare Metals, 2013
- An analysis of the tensile elongation to failure of laminated metal composites in the presence of strain-rate hardeningActa Materialia, 2012
- A Simple Analytical Model of Asymmetric RollingArchives of Metallurgy and Materials, 2012
- Behavior of aluminum oxide, intermetallics and voids in Cu–Al wire bondsActa Materialia, 2011
- In situ and ex situ transmission electron microscopy investigation of Cu–Al–Cu–Ti reactive metallic multilayer coatingsJournal of Materials Research, 2010
- Laminated nanostructure composites with improved bend ductility and toughnessScripta Materialia, 2009
- Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by asymmetrical rollingScripta Materialia, 2007
- Microstructure and fracture properties of an ultrahigh carbon steel–mild steel laminated compositeScripta Materialia, 2003
- Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealingScripta Materialia, 2002
- Deformation and fracture in microlaminatesThin Solid Films, 1996